Multiwayvalve Water Softener with FRP Material

• Installation: Vertical Type
• Working Principle: Ion Exchange
• Certification: CE, ISO
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: YL-I-25
• Inlet Mode: Pipeline
• Heating Mode: No
• Control Mode: Flow Type, Time Type
• Resin: 001×7 Strong Acidic Cation-Exchange
• Working Ambient Temperature: 5-50centigrade
• Relative Humidity: Less Than 95%(25centigrade)
• Hardness of Raw Water: Less Than 8mmol/L
• Hardness of Effluent: Less Than 0.03mmol/L
• Inlet Water Pressure: 0.2 to 0.4mpa
• Free Chlorine: Less Than 0.3mg/L
• Suspended Solid: Less Than 0.5mg/L
• Iron Content: Less Than 0.3mg/L
• Transport Package: Plywood Case Into Container
• Specification: 25m3/hr
• Trademark: YLD
• Origin: Jiangyin, Jiangsu, China
• HS Code: 8421219990
• Production Capacity: 5000 Set/Year
• Package Size: 225.00cm * 125.00cm * 125.00cm
• Package Gross Weight: 1200.000kg

Product Description

Multiwayvalve Water Softener with FRP Material

Product Description

Working principle

To absorb the calcium and magnesium ions in the water with resin-As the hardness of the water is mainly formed and expressed by calcium and magnesium, the cation exchange resin (water softener)is generally used to replaceCa2 + and Mg2in the water The resin efficiency to removeca2 + and Mg2+ gradually reduces as ca2 + and Mg2 + in the resin increase. When the resin absorbs a certain amount of calcium and magnesium ions, it is necessary to be regenerated. In the regeneration process, the resin bed is flushed by saline in the salt box and hardness ions on the resin are replaced and discharged with recycled waste fluid, the resin's function of softening exchange is recovered. The principle of sodium ion exchanging softening treatment is to use sodium cation exchange resin to exchange the hardness ingredients, Ca2 + and Mg2 +, in the raw water with Na + in the resin, absorbing Ca2 + and Mg2 + in the water, so that water gets softened.

Working principle01. By means of Absorbing the calcium and magnesium ions in water with resin, since the hardness of water is mainly composed of calcium and magnesium, in general, we adopt cation exchange resin (softener), replace Ca2+, Mg2+ (main ingredients for scale) in water, as the increase of Ca2+ and Mg2+ in resin, removing performance on Ca2+, Mg2+ of resin will gradually reduce.
02. When the resin has absorbed a certain amount of calcium and magnesium ions, it must be regenerated, the regeneration process is that flush resin layer with the salt water in salt box, replace hardness ion out of the resin again, and discharged from the tank with waste liquid of regeneration, then resin resumed the function of softening and exchanging.
03. The principle of sodium ion exchange and softening treatment is to exchange cation in the raw water with resin, hardness constituents Ca2+and Mg2+ in water exchange Na+ in resin, thus absorb the Ca2+and Mg2+ to make the water to be softened.
2RNa + Ca2+ = R2Ca + 2Na+
2RNa + Mg2+ = R2Mg + 2Na+
After the water treated by sodium ion exchanger, the Ca+ and Mg+ were superseded by Na +.
Application scope of softener
Mainly used in industry and civil water softening preparation, such as Boiler feed water make-up water, air conditioning system make up water, heat exchanger, power plant, chemical, textile, printing and dyeing, bio-pharmaceutical, Electronic system and water pretreatment.

Product Parameters

 

Category	Model	Recommended water yield (M³/h)	Tank size Diameter *Height(mm)	Salt box (L)	Amount of resin(KG)
Single-valve and single-tank	YL-I-0.5	0.5	200×900	25	20
	YL-I-1	1	250×1400	60	40
	YL-I-2	2	300×1400	200	60
	YL-I-3	3	350×1400	100	80
	YL-I-4	4	400×1650	200	120
	YL-I-5	5	500×1750	300	180
	YL-I-6	6	300×1900	350	240
	YL-I-10	8-10	750×1900	500	360
	YL-I-18	42-18	900×1900	800	520
	YL-I-25	18-25	1000×2200	1000	720
	YL-I-35	25-30	1200×2400	1500	1000
	YL-I-50	35-50	1500×2500	2000	6400
Dual-valve and dual-tank (simultaneous operation and respective regeneration)	YL-II-36	24-36	900×1900	800	1040
	YL-II-50	36-50	1000×2200	1000	1440
	YL-II-70	50-70	1200×2400	1500	2000
	YL-II-100	70-100	1500×2500	2000	3200
Dual-valve and dual-tank(One for use and the other for standby)	YL-II-1	1	250×1400	60	80
	YL-II-2	2	300×1400	100	120
	YL-II-3	3	350×1400	100	160
	YL-II-4	4	400×1650	200	240
	YL-II-5	5	500×1750	300	360
	YL-II-6	6	600×1900	350	480
	YL-II-10	8-10	750×1900	500	720
	YL-II-18	12-18	900×1900	800	1040
	YL-II-25	18-25	1000×2200	1000	1440
	YL-II-35	25-35	1200×2400	1500	2000
	YL-II-50	35-50	1500×2500	2000	3200

Installation Instructions

 

Certifications

After Sales Service

We provide 24 hours online customer service.

Any inquiry about water treatment system, please feel free to contact me for further details!

Contact information:
 
Website: http://yldwater.en.made-in-china.com
Official website: yldwater.en.made-in-china.com
Guarantee period:1 year