24 Hours Continuous Running Water Softener pictures & photos
  • 24 Hours Continuous Running Water Softener pictures & photos
  • 24 Hours Continuous Running Water Softener
  • 24 Hours Continuous Running Water Softener
  • 24 Hours Continuous Running Water Softener
  • 24 Hours Continuous Running Water Softener
  • 24 Hours Continuous Running Water Softener
  • 24 Hours Continuous Running Water Softener

24 Hours Continuous Running Water Softener

Installation: Vertical Type
Working Principle: Ion Exchange
Certification: CE, BV
Customization:
Shipping Cost:

Estimated freight per unit.

about shipping cost and estimated delivery time.
Payment Method: visa mastercard discover JCB diners club american express T/T
  Initial Payment Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
From payment to delivery, we protect your trading.
24 Hours Continuous Running Water Softener pictures & photos
24 Hours Continuous Running Water Softener
US $900-1,000 / Piece
Min. Order: 1 Piece
Diamond Member Since 2013

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
YL-II-3
Inlet Mode
Pipeline
Heating Mode
No
Control Mode
Flow Rate Type, Time Type
Resin
001×7 Strong Acidic Cation-Exchange
Working Ambient Temperature
5-50centigrade
Relative Humidity
Less Than 95%(25centigrade)
Hardness of Raw Water
Less Than 8mmol/L
Hardness of Effluent
Less Than 0.03mmol/L
Inlet Water Pressure
0.2 to 0.4mpa
Free Chlorine
Less Than 0.3mg/L
Suspended Solid
Less Than 0.5mg/L
Iron Content
Less Than 0.3mg/L
Transport Package
Plywood Case Into Container
Specification
CE, SGS
Trademark
YLD
Origin
Jiangyin, Jiangsu
HS Code
842121999
Production Capacity
5000 Sets/Year

Product Description

24 Hours Continuous Running Water Softener
Working principle
01. By means of Absorbing the calcium and magnesium ions in water with resin, since the hardness of water is mainly composed of calcium and magnesium, in general, we adopt cation exchange resin (softener), replace Ca2+, Mg2+ (main ingredients for scale) in water, as the increase of Ca2+ and Mg2+ in resin, removing performance on Ca2+, Mg2+ of resin will gradually reduce.
02. When the resin has absorbed a certain amount of calcium and magnesium ions, it must be regenerated, the regeneration process is that flush resin layer with the salt water in salt box, replace hardness ion out of the resin again, and discharged from the tank with waste liquid of regeneration, then resin resumed the function of softening and exchanging.
03. The principle of sodium ion exchange and softening treatment is to exchange cation in the raw water with resin, hardness constituents Ca2+and Mg2+ in water exchange Na+ in resin, thus absorb the Ca2+and Mg2+ to make the water to be softened.
2RNa + Ca2+ = R2Ca + 2Na+
2RNa + Mg2+ = R2Mg + 2Na+
After the water treated by sodium ion exchanger, the Ca+ and Mg+ were superseded by Na +.
24 Hours Continuous Running Water Softener
Application scope of softener
Mainly used in industry and civil water softening preparation, such as Boiler feed water make-up water, air conditioning system make up water, heat exchanger, power plant, chemical, textile, printing and dyeing, bio-pharmaceutical, Electronic system and water pretreatment.

Control mode of fully automatic water softener
(1) Single tank time type: It adopts microcomputer to control the time, when operation of the equipment reaches setting time, it will automatically enter the regeneration condition, which can be regenerated for once a day or once for some day.
(2) Single tank flow type: It adopts control of turbine flow or electronic flow sensor, when the yield of softener reaches preset flow it will automatically enter the regeneration condition, which can be recycled many times every day.
(3) Double tanks flow type: Which could be divided into one running-one alternating, and simultaneous running and separately regeneration.
(4) One running and the other alternation type: One tank is running while the other is alternating, when water yield of operating tank reaches the preset flow rate, it will enter the regeneration stage, meanwhile, the other tank will enter the working state, these two tanks work and regenerate alternatively to realize continuous water supplying of 24 hours.
(5) Simultaneous running and separately regeneration type: Two cans running simultaneously, when the flow rate reaches the setting rate, one tank (can) will regenerate and the other tank will output water continuously, when the first regeneration tank finish the regeneration it will enter the working stage, the other one will enter regeneration stage, these two cans finish regeneration and enter working state simultaneously. 24 Hours Continuous Running Water Softener
 hardness of raw water  
≤8mmol/L

power supply
220V/50HZ
 hardness of effluent  
≤0.03mmol/L
control mode flow rate type, time type
  water inlet
pressure
 
0.2~0.4Mpa
resin 001×7 strong acidic cation-exchange
free chlorine  
≤0.3mg/L
working ambient temperature  
5-50 degree
        suspended solid <0.5mg/L system water temperature 5-45 degree
iron content <0.3mg/L  relative humidity ≤95%(25 degree)
24 Hours Continuous Running Water Softener
24 Hours Continuous Running Water Softener
24 Hours Continuous Running Water Softener
Our services:

We provide 24 hours online customer service.

Any inquiry about water treatment system, please feel free to contact me for further details!

Contact information:
Mobile phone: +86 13585066069
Alibaba website: http://yldwater.en.made-in-china.com
Official website: yldwater.en.made-in-china.com
Guarantee period:1 year
After-sale service:800-827-87-226


 

Send your message to this supplier

*From:
*To:
avatar Miss Mint Shi
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now