Continuously Rotating Ss Brush Mesh Screen Self-Cleaning Filter

Type: Water Filter
Usage: Environmental Protection
Motive Force: Electric power
Style: Vertical
Performance: Efficient Filtration
Certification: CE, GS
Customization:

Contact Supplier

Diamond Member Since 2013

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
YL-8Y
Material for Filter Housing
Carbon Steel,Stainless Steel304/316,etc
Design Pressure
1.6MPa,1.0MPa
Working Pressure
No Less Than 0.6MPa
Filtering Screen
Ss304/Ss316,316L
Filtration Micron
150-2000 Micros
Control System
Timer Controller,PLC
Working Temperature
No More Than 90 Centigrade
Cleaning Shaft
Ss304/316
Double Clean Brush
Option
Transport Package
Plywood Case or Pallet
Specification
to be practical
Trademark
YLD
Origin
Jiangyin, China
HS Code
842121999
Production Capacity
100 Sets/Month

Product Description

Automatic Screen Filter ABF
 
A series of heavy duty filters with automatic cleaning, designed for filtrates with high content of suspended solids and high flow rates. When a differential pressure is sensed the cleaning cycle is initiated and two stainless steel brushes remove debris from the filter screen. The debris is then flushed out the exhaust, using less than 1% of the total flow and without interrupting output. Filtration degrees between 200-3500 micron and flow rates of up to 7200 m3/s can be achieved. Higher flow rates can be achieved by banking multiple units.
  
The cleaning process
During filtration water flows though the cylindrical screen of the strainer from the inside out. Debris collected on the inner surface of the screen form a "filter cake" that causes a pressure drop across the screen. When this pressure differential reaches a preset value, it is detected by the filter control system and the self-cleaning process automatically starts.
A specially designed exhaust valve, opens and the  drive unit starts to rotate two stainless steel brushes which sweep the inner surface of the cylindrical screen. The particles trapped on the screen are dislodged by the revolving brushes and flushed out through the open exhaust valve. Service flow of filtered water is uninterrupted throughout the approximate 20 seconds cleaning process. At the end of the self-cleaning process the motor stops and the exhaust valve closes. The filter control system continues to monitor the differential pressure and when needed starts a new self-cleaning cycle.  automatic brush filters are useful mostly for heavy duty, heavy dirt load and coarse filtration applications ranging from 3500 to 200 micron.



Function
Automatic brush filter the original water filtration and automatic filter cleaning discharge function, and cleaning sewage system uninterrupted water supply. Automatic brush filter cleaning has two control modes: Automatic control and manual control.

Automatic control: Automatic control timing and pressure difference. In the filtering time timer is set on the filtration time, when the filtering time, start the sewage, discharge time from emission time timer setting. At the same time control system real time system and the pressure difference of the user set pressure difference comparison, when the system pressure reaches the set pressure, Also for cleaning sewage filter, pollution by sewage time timer. Arrive at discharge sewage time, stop washing, the system is restored to its initial state, following is the preparing for the next process.
Manual control: Will the operation panel on the automatic / manual selection switch to manual position, filter for sewage.
The user can choose according to the two control mode, specific operations, see behind the operation part.

ith the electric automatic self cleaning screen filter comes a series of automatic cleaning filters, designed for filtration of poor quality water to very fine filtration rates. The filter is automatically cleaned by suction scanners when a pressure differential (typically 0.5 bar) is sensed. The suction scanners vacuum the inside of the screen's surface and  flush  any debris out the exhaust, using less than 1% of the total flow and without interrupting output. Filtration degrees between 10 and 800 micron and flow rates of up to 400 m3/h can be achieved. Higher flow rates can be achieved by banking multiple units.

application:
The circulated or non-circulated cooling water system, heat exchange system, central air conditioning system and central heating system in the industries like architecture, chemistry, metallurgy, rubber, paper making, light textile, coal and foods, used to protect the cooling equipment, heat exchange device and air conditioner accordingly.
 
features
Heavy duty filter for high loads of suspended solids and high flow-rate
Durable electrically driven revolving-brush cleaning mechanism
Automatic flushing according to pressure differential and/or according to time
Option for continuous flushing
Low pressure operation, suitable for 2 bar and lower
No interruption of downstream flow during flushing
Applications: Water supply systems, cooling water, waste water treatment
Industries: manufacturing, mining, water and waste water treatment plants, turf and agriculture, etc.

Modelcapacity(m³/Hr)water Inlet & outletDrain pipe(mm)Weight(Kg)
mminch
YL-X-5019502DN2585
YL-X-8050803DN2587
YL-X-100801004DN25210
YL-X-1251251255DN32212
YL-X-1501801506DN32212
YL-X-2003202008DN40220
YL-X-25049025010DN50395
YL-X-30071030012DN50405
YL-X-35097035014DN65625


Send your message to this supplier

*From:
*To:
avatar Miss Mint Shi
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now