Water Treatment Plant Pretreatment Activated carbon filter
Plant description
Filtration -The process of filtration involves the flow of water through a granular bed, of sand or another suitable media, at a low speed. The media retains most solid matter while permitting the water to pass. This type of slow filtration over a granular bed is generally known as slow sand filtration. It is the oldest method of filtration but still widely used in municipal water treatment plants & for industrial application as well.
Advantages:
The active carbon filters of the unit removes the non-desired contaminations such as free active chlorine, odor and taste deteriorating materials and noxious haloform chemicals with adsorption from the untreated water. Beside of that the media filter decreases the organic content of the water and the possible fine contaminations. By periodical intense countercurrent flow, the deposited contaminations can be eliminated from the filter and the filter media will be loosened. If the adsorption ability runs out, the media needs to be changed.
Working principle:
For the by-pass filtration, the filter is installed in the main circulating pipeline to filter all the circulating water,
but apart of the circulating water led from the main circulating pipeline is filtered, which is a repeated
circulatininterception step by step to filter the impurities within the system and finally remove the impurities
by thenecessary backwash out of the system. Installing a by-pass filter in the circulating water system can
prevent the terminal pipe of device from sludge blocking and remove the impurities in the system with
chemical dosing.
By-pass filtration is used to reduce the turbidity of the water circulation system, exactly, to reduce slime
and
prevent its deposition in the heat exchanger, so that the effect of agent will be better.
Generally speaking, if your filter is a quartz sand filter, it usually has two main functions:
1. To reduce suspended solids (turbidity). Otherwise, as the system is running, suspended solids increases
, which will exacerbate the deposition and other problems.
2. Degreasing. Especially the oily turbid circulation, such as steel rolling and continuous casting, has high
oil content and is easy for breeding microorganism and blocking the nozzles.
Parameters
Pressure rating: 0.25Mpa~2.5Mpa
Single filter flow :2-50 m3/hour
Working temperature range: 0 ~ 65 °C
Effluent turbidity:less-than 3
Inlet and outlet Connection: flange
Backwash water: for total filtered water 1 to 3%
Control mode: pressure control; PLC timing control
Sewage way: automatic
Rated operation voltage: can be customized
Model |
Flow Rate
(m3/H) |
Inlet and outlet
(mm) |
Filter area
(m2) |
Diameter
(mm) |
Height
(mm) |
YLD-SF-800 |
15-25 |
50 |
0.5 |
800 |
960 |
YLD-SF-1000 |
23-39 |
50 |
0.79 |
1000 |
1200 |
YLD-SF-1200 |
33-55 |
80 |
1.13 |
1200 |
1400 |
YLD-SF-1400 |
45-75 |
100 |
1.54 |
1400 |
1600 |
YLD-SF-1600 |
60-100 |
100 |
2.01 |
1600 |
1800 |
YLD-SF-1800 |
75-125 |
150 |
2.54 |
1800 |
1950 |
YLD-SF-2000 |
95-155 |
150 |
3.14 |
2000 |
2150 |
YLD-SF-2200 |
115-190 |
150 |
3.80 |
2200 |
2250 |
YLD-SF-2400 |
130-210 |
150 |
4.52 |
2400 |
2300 |
YLD-SF-2600 |
145-225 |
150 |
5.3 |
2600 |
2400 |
YLD-SF-2800 |
155-240 |
200 |
6.15 |
2800 |
2500 |
YLD-SF-3000 |
170-255 |
200 |
7.00 |
3000 |
2600 |
Applications :
? For dechlorination of water for industrial/drinking water applications.
? Removal of organic matter from water.
? Filters are available in MS, MSRL, FRP, operating in Manual / Auto mode.
Audited Supplier 
){kind=link}
){kind=link}