1000L Make up Water Pump Expansion Tank

• Customization: Available
• Certification: ISO9001
• Wall Thickness: 8mm
• Model NO.: YL-1000
• Installation: Vertical Type
• Material: Stainless Steel/Carbon Steel
• Type: Water Refilling Station
• Item: Make up Water Pump Expansion Tank
• Performance: Efficient Filtration
• Style: Vertical
• Motive Force: Electric Power
• Usage: Environmental Protection
• Volume Outlet Diameter: 50mm
• Height of The Equipment: 2800mm
• Tank Diameter Weight of Gas Pressure Tan: 1865kg
• Volum: 1000L
• Bladder: Natural Rubber
• Transport Package: Plywood Case Into Container
• Specification: CE, GSG
• Trademark: YLD
• Origin: Jiangyin, Jiangsu, China
• HS Code: 842121999
• Production Capacity: 5000 Sets/Year
• Package Size: 270.00cm * 110.00cm * 110.00cm
• Package Gross Weight: 500.000kg

Product Description

1000L Make up Water Pump Expansion Tank

Working principle
Inevitably, there's air in the heating and cooling water circulation system and it is mainly from systems water refilling and leaks of pipeline. The air in the system exists in three forms: Form I, the air is gathered as air mass at the high points or the local high points of the system, such as pipeline corners and the top of heat exchanger (radiator and fan coil), etc: Form II, the air moves as free bubbles with the water cycle in the system; Form Ill, the air is dissolved in the water and moves with the water cycle. Among above three air existence forms, Form I and II are free air and Form Ill is dissolved air; These three forms be mutually converted continuously, but the existence volume in each form will be relatively stable in the absence of the ambient condition change.
The air in water will adversely impact the heating and cooling water circulation system. The air resistance generated by the air accumulation will result in uneven system resistance and poor circulation system, producing noise, cavitation and aired up, which will reduce the pump's effectively lift and operating efficiency and reduce the life of the equipment and pipeline; Bubbles attached to the surface of the heat exchanger will reduce the efficiency of the heat transfer: The system air resistance will cause the difficulty in system debugging and manual exhaust is often required during operation. Oxidation in the system will cause oxygen corrosion of the system which will reduce the life of the system and directly impact the security of the entire system.
In view of the above problems, the vacuum degasser developed by our company can greatly shorten the exhausting time after the initial water flooding to the heating or cooling system, which is highly conducive to the initial commissioning and operation of the system. The air in the system is removable online to prevent air resistance, thus ensuring a stable and reliable system during normal operation. Moreover, the pump cavitation can also be eliminated, reducing the running noise of the system. Due to the removal of oxygen in the water, the oxygen corrosion of the system will be reduced, extending the equipment life. In addition, no air bubble is attached on the surface of the heat exchanger, so that the heat transfer efficiency is improved. The equipment adopts vacuum degassing and deoxidation, so there will be no secondary pollution problem. In addition to easy installation and automatic control, the equipment can run safely and reliably and be maintained easily.

Scope of application
Vacuum degasser applies to all kinds of heating or cooling water circulation system and its work time and cycle can be adjusted as required. The applicable system capacity of a single unit can be up to 150m3 and several units can be used in parallel for a large circulation system.

Characteristics
1. Combing automatic constant pressure, swelling, water refilling and degassing as a whole.
2. Automatically remove the air in the water and ensure the system is always in the state of full-load operation;
3. Greatly shorten the exhaust time after the initial water flood to the heating or cooling system, which is highly conducive to the initial commissioning and operation of the system.; 4. Effectively prevent the pump cavitation;
5. Lower system running noise;
6. No air bubble is attached on the surface of the heat exchanger, improving the heat transfer efficiency;
7. Simple equipment installation, automatic control and safe and reliable operation;
8. The applicable system capacity of a single unit can be up to 1 50m3;
9. Refilling water volume of the system can be adjusted as needed.

Model	Overall Volume  (m 3)	Adjusted volume (m 3	Inlet and outlet (mm)	Height of device(H)	Diameter of tank	Length of trestle A	Width of trestle B	Weight of tank (Kg)
YL-400	0.125	0.038	25	1200	400	1200	700	150
YL-600	0.4	0.15	50	2000	600	1500	800	250.1
YL-800	0.90	0.35	50	2500	800	1800	900	325.7
YL-1000	1.37	0.41	65	2680	1000	2000	1100	430.4
YL-1200	2.30	0.59	65	2970	1200	2200	1300	815
YL-1400	3.40	1.02	80	3350	1400	2400	1400	1150
YL-1600	5.034	1.57	80	3600	1600	2600	1600	1367
YL-1800	7.06	2.12	100	3600	1800	2800	1900	1863
YL-2000	9.42	2.85	100	3800	2000	3000	2100	2281

 

After Sales Service

 

Our services:

We provide 24 hours online customer service.

Any inquiry about water treatment system, please feel free to contact me for further details!

Contact information:
Mobile phone: [phone]
Website: http://yldwater.en.made-in-china.com
Official website: yldwater.en.made-in-china.com
Guarantee period:1 year
After-sale service:800-827-87-226

Certifications

Company Profile

Development History:
2000: Jiangyin YLD was founded.
2004:Jiangyin YLD change to Jiangsu YLD, registered fund from 50 ten thousand to 500 million, factory area from 1500m² to 15000 m².
2005: From 2005 year to now, every year credit rating was awarded "AAA" .
2007: Jiangyin science and technology bureau granted YLD "JIANGYIN ENGINEERING AND RESEARCH CENTER FOR WATER FILTER AND ULTRAVIOLET STERILIZATION"
2009: Open the foreign market, the products were sold abroad, Canada, USA, Singapore and so on.
2010: YLD Trademark was registered successful.
2012: The formal establishment of the ministry of foreign trade opened up more foreign markets.
2014: Patented by many products independently researched and developed by the company.
2015: The self-developed multi-cartridge automatic backwash filter was rated as a high-tech product and obtained a certificate.
2016: The company was rated as a scientific and technological enterprise and a high-tech enterprise in Jiangsu Province.
2019: The company got "Manufacture License of Special Equipment People's Republic of China".
2020: Awarded the title of "Loving Enterprise" by the government and "Quality Supplier" by suppliers
2021: Got the new certificater: Disinfection enterprse health license.