Backwashing Active Carbon Filter Tank for Agricultural Irrigation

• Customization: Available
• Certification: CE
• Material: Stainless Steel/Carbon Steel
• Model NO.: YLD-1600
• Type: Filter
• Performance: Sophisticated Filters
• Motive Force: Electric power
• Style: Vertical
• Usage: Environmental Protection, Chemical Industry
• Certificate: CE, ISO
• Form: by-Pass
• Flow Rate: 20 T/Hr
• Inlet and Outlet Diameter: Dn 65mm
• Tank Size: 1600*2900
• Transport Package: Plywood Case Into Container
• Specification: CE, SGS
• Trademark: YLD
• Origin: Jiangyin, Jiangsu
• HS Code: 842121999
• Production Capacity: 5000 Sets/Year

Product Description

Description:
Activated carbon filter is mainly used for adsorption water free chlorine (99%) removal, get rid of some other filters cannot remove the solubility of organic matter, such as phenol, aldehyde, textile dyes, pesticides, etc., organic matter and chromaticity also had higher removal. Is softening, out of pure salt system manufacturing process equipment pretreatment. Filter material for activated carbon. Equipment main material for carbon steel corrosion, steel lining rubber and stainless steel, etc.
 
Working principle:
This carbon filter consists mainly of carbon layer and supporting layers. Activated carbon has developed porosity, surface area, has the very high adsorption ability. It is by active carbon this characteristic, it is in the deep treatment who is widely used, such as drinking water, sewage hind paragraph (water) deep processing, etc.
Use active carbon adsorption after period of time, a large amount of adsorption qualitative, gradually becoming saturated, lose working ability, serious when will penetrate filter layer, and therefore should be timely regenerate active or replacement.
Supporting layer's main function is to prevent activated carbon from equipment in water erosion, when using rinse water plays a certain role uniform cloth.
The main technique parameters:
Filtration speed: 8-12m/h water turbidity: < 15mg/L
Effluent turbidity: 5mg/L working temperature: under normal temperature
Working pressure: < 0.4 Mpa filter material layer height: 1000-1200mm
Reverse-wash compressed air quantity: 18-25L/m2. S compressed air pressure: 0.1-0.2 Mpa
Reverse-wash strength: 15L/m2. S (single) 12L/m2. S (double) backwash time: 5-10 minutes
 
FAQ:
 
01.  how small a solid needs to be removed,
02.  how dirty the water is,
03.  how the water will be used once it is filtered,
04.  and the source of backwash water needed to clean the filters.
 
Specifications:
 

TPYE	Inlet and outlet (mm)	Filter area (mm)	FLOW RATE (m3/hr)
YLD500*816	40	0.2	6~10
YLD 600*874	40	0.28	8-14
YLD 700*900	40	24000.38	12-19
YLD 800*957	50	24000.5	15-25
YLD 900*1100	50	25000.64	18-30
YLD 1000*1200	50	26000.79	23-39
YLD 1100*1250	50	27000.95	28-47
YLD 1200*1300	50	28001.13	33-55
YLD 1400*1700	100	28501.54	45-75
YLD 1600*1800	150	29002.01	60-100
YLD1800*1900	150	2.54	75-125
YLD2000*2000	150	3.14	95-155
YLD2200*2000	150	3.8	115-190
YLD2400*2100	150	4.52	130-210
YLD2600*2400	150	5.3	145-225
YLD2800*2500	200	6.15	155-240