Customization: | Available |
---|---|
Type: | Sand Filter |
Usage: | Environmental Protection, Chemical Industry, Water Treatment |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
is one of the main equipments of the deep treatment of the water , and the selection of filter material generally is quartz sand or activated carbon.It is widely used for water pretreatment,such as, pure water, drink water in food, mineral water and water in electronics,printing and dyeing, papermaking, chemical industries, and it is also used to filtrate industrial wastewater after secondary treatment . And it is used for deep filtration of water reuse system and water treatment system of swimming pool. There is very good removal effect on suspended solids in industrial wastewater.
Compared with other products, the products and water purifier of our company have the advantages of long using life, low energy consumption, good effect and the following characteristics:
The device has simple structure and it is convenient to operate and maintain; The operation can realize the automatic control, high filtration efficiency, small resistance, large processing flows,less fequency of recoil.There is two washing systems: gas washing and water washing and it has the function of putting an end to short flow.
when the system is in filtering status, unfiltered water flow through the distributor with the action of shell with flat flowing to enter the filtering sand material layer, when water flows through the filtering material layer, impurities are trapped in the filtering material layer. the filtered water will be collected by collector and outflow uniformly. smooth filtering could realize the high speed filtering and good filtering effect.
Back-washing status
With the continuous accumulation of impurities in the filter layer, head loss will continue to increase. The factory setting with backwash once in24 hours , when it reaches the setting time, automatic back-washing will be started to clean accumulated impurities.
The working principle is back-washing recoil and surface cleaning.
model |
Filter diameter |
Height |
inlet-outlet |
filtration area |
capacity |
mm |
mm |
mm |
m² |
m³/hour |
|
YL-SF-500 |
500 |
816 |
40 |
0.2 |
6~10 |
YL-SF-600 |
600 |
874 |
40 |
0.28 |
8~14 |
YL-SF-700 |
700 |
900 |
40 |
0.38 |
12~19 |
YL-SF-800 |
800 |
960 |
DN50 |
0.50 |
15-25 |
YL-SF-1000 |
1000 |
1200 |
DN50 |
0.79 |
23-39 |
YL-SF-1200 |
1200 |
1400 |
DN80 |
1.13 |
33-55 |
YL-SF-1400 |
1400 |
1600 |
DN100 |
1.54 |
45-75 |
YL-SF-1600 |
1600 |
1800 |
DN100 |
2.01 |
60-100 |
YL-SF-1800 |
1800 |
1950 |
DN150 |
2.54 |
75-125 |
YL-SF-2000 |
2000 |
2150 |
DN150 |
3.14 |
95-155 |
YL-SF-2200 |
2200 |
2250 |
DN150 |
3.80 |
115-190 |
YL-SF-2400 |
2400 |
2100 |
DN150 |
4.52 |
130-210 |
YL-SF-2600 |
2600 |
2400 |
DN150 |
5.30 |
145-225 |
YL-SF-2800 |
2800 |
2500 |
DN200 |
6.15 |
155-240 |
YL-SF-3000 |
3000 |
2600 |
DN200 |
7.00 |
170-255 |
YL-SF-3200 |
3200 |
2800 |
DN250 |
8.15 |
270-320 |