Single FRP Resin Tank Large Capacity Water Softener
If there are stains or buildup on your sinks and bathtubs...if you have to use large amounts of soap to clean dishes or wash your hair...or if your water tastes or smells odd, you probably have hard water.
If left untreated, the minerals in hard water will cause yellow stains on plumbing fixtures and be deposited as scale, eventually clogging plumbing and shortening the life of appliances like washing machines, water heaters and dishwashers. Scale deposits not only cut down on the efficiency of these appliances, they cost you money, increasing both energy and maintenance bills.
Charger Water Treatment Products - Professional Series Water Softeners eliminate the effects of hard water by removing the calcium and magnesium found there. Water is treated at the point-of-entry to the home, extending the useful life of water heaters, coffeemakers, humidifiers and household plumbing by as much as 30%.
What does a Water Softener do?
Water softeners use a process called ion exchange. The softener unit contains a column filled with beads of a resin which remove the dissolved calcium and magnesium ions from the hard water flowing through it, replacing them with sodium. Periodically, (typically once a day) the softener regenerates the resin by washing with brine (sodium chloride solution), carrying the calcium and magnesium to drain, and leaving fresh sodium ions on the resin ready for the next treatment cycle. Regeneration is usually triggered automatically by either an electronic timer or mechanical water flow meter. The unit has to be refilled with salt (in the form of granules, small tablets or blocks) typically once a month.
How a Water Softener Works?
Hard water passes through the media tank that contains resin beads coated with sodium ions. The calcium and magnesium ions are exchanged for sodium (or potassium) ions, thus softening the water.
When the beads have trapped the hardness and need to be regenerated, the control valve charges them with brine (salt and water solution) from the brine tank. As regeneration occurs, calcium and magnesium (hardness) ions are freed from the beads, replaced with sodium or potassium ions; and the system is ready to soften water again.
How the Water Softener Regeneration Process Works
There are 3 basic types of water softener controls that are used in residential applications to manage the regeneration process. The control valve will manage the frequency of recharging the resin beads that clean the water and flushing the contaminated water out of the system
Ca2+and Mg2+ to make the water to be softened.
2RNa + Ca2+ = R2Ca + 2Na+
2RNa + Mg2+ = R2Mg + 2Na+
After the water treated by sodium ion exchanger, the Ca+ and Mg+ were superseded by Na +.
Application scope of softener
Mainly used in industry and civil water softening preparation, such as Boiler feed water make-up water, air conditioning system make up water, heat exchanger, power plant, chemical, textile, printing and dyeing, bio-pharmaceutical, Electronic system and water pretreatment.
Type choice:
Softener equipment applies cation resin for softing raw water,its main target is to use cation resin to adsorp (main parts of ),encreasing the hardness of raw water.
1. Users can choose manual operation control system for saving cost.
2. If users using for 24 hours can accord to water using time choosing for rebirth
3. Uses can according to water quality requirement:first grade multi-media filter,which can remove mud,rust,colloid and suspension in water.Second grade activated carbon filter,which can remove color,olfactory,biochemistry organic in water and encrease the left oxygen value and pollution in water.Third grade equiped softener equipment.
4. Effluent water capacity achieves the water supply of national low-pressure bioler.
5. Time control- type;flow control- type.In working ,apply single-tank,double-tank and multi-tank etc. other varied combination method.When choosing,users can choose as their needs.In operation,it has not only automatic function,but also is manual operation.
Technoloty index and working
Water pressure:0.18-0.6Mpa
Working temperature:1°c-55°c
Hardness of raw water: <8mmol/L
Operation method:manual/automatic
Hardness of effluent water: ≤0.03mmol/L
water flow: 0.3-100 m3/hour
Rebirth method:
Control method: time or flow
Working electric: 220V/50Hz
Mineral Tank:
The mineral tank is where the action is. It is where the water filtration takes place and the hard water is softened (calcium and magnesium are removed).
Brine Tank:
The brine tank is where a highly concentrated solution of salt or potassium is stored.
Control Valve:
The control valve is the device that controls the flow of water into and out of the mineral and brine tanks during regeneration.
Applications
System automatic water softener widely used in steam bioler,heating bioler,exchanger,air conditioner, and other systems water softener,also used in hotel,restruant,office, and other life water treatment and food,drinking,wine,washing,textile,chemical,medicine and other industrial softener water treatment.
Water softener for hardness removing
Type I : Single-tank and single-valve( flow rate based control)
| Model |
water output
(m³/hour) |
Resin-Tank<mm>
(diameter*Height) |
Brine tank
(Liter) |
Resin
(kg) |
connecting pipe(inch) |
| YL-I-0.5 |
0.5 |
200×1200 |
60 |
20 |
3/4 |
| YL-I-1 |
1 |
250×1400 |
60 |
40 |
3/4 |
| YL-I-2 |
2 |
300×1400 |
100 |
60 |
1 |
| YL-I-3 |
3 |
350×1650 |
200 |
80 |
1 |
| YL-I-4 |
4 |
400×1650 |
200 |
120 |
1 |
| YL-I-5 |
5 |
500×1800 |
200 |
180 |
1 |
| YL-I-6 |
6 |
600×1850 |
350 |
240 |
1.5 |
| YL-I-10 |
10 |
750×1850 |
500 |
360 |
1.5 |
| YL-I-16 |
16 |
900*2200 |
1000 |
520 |
2 |
| YL-I-20 |
20 |
1000*2200 |
1500 |
720 |
2 |
| YL-I-28 |
28 |
1200*2400 |
2000 |
1000 |
3 |
| YL-I-50 |
50 |
1500*2400 |
2000 |
1600 |
3 |
Type II.dual-tank and dual-valve, two tanks work simultaneously but regenerate at different time
| Model |
water output
(m³/hour) |
Resin-tank<mm>
(diameter*Height) |
Brine-tank(Liter) |
Resin
(kg) |
connecting pipe(inch) |
| YL-II-0.5A |
0.5 |
200×1200 |
60 |
40 |
3/4 |
| YL-II-1A |
1 |
250×1400 |
60 |
80 |
3/4 |
| YL-II-2A |
2 |
300×1400 |
100 |
120 |
1 |
| YL-II-3A |
3 |
350×1650 |
200 |
160 |
1 |
| YL-II-4A |
4 |
400×1800 |
200 |
240 |
1 |
| YL-II-5A |
5 |
500×1800 |
200 |
360 |
1 |
| YL-II-6A |
6 |
600×1850 |
350 |
480 |
1.5 |
| YL-II-10A |
10 |
750×1850 |
500 |
720 |
1.5 |
| YL-II-18A |
14-18 |
900×1850 |
500 |
720 |
1.5 |
| YL-II-25A |
20--25 |
750*1850 |
500 |
720 |
2 |
| YL-II-36A |
30--36 |
900*1900 |
800 |
1040 |
3 |
| YL-II-50A |
45--50 |
1200*2400 |
1000 |
1440 |
3 |
| YL-II-70A |
60--70 |
1200*2400 |
1500 |
2000 |
3 |
| YL-II-100A |
80--100 |
1500*2500 |
2000 |
3200 |
3 |
| |
|
|
|
|
|
|
Type III.:dual-tank and single valve,one work one standby
| Model |
water output |
Resin-tank<mm> |
Brine tank
(Liter) |
Resin
(kg) |
connecting pipe(inch) |
| m³/hour |
(diameter*Height) |
| YL-II-1B |
1 |
250×1400 |
60 |
80 |
3/4 |
| YL-II-2B |
2 |
300×1400 |
100 |
120 |
1 |
| YL-II-3B |
3 |
350×1400 |
100 |
160 |
1 |
| YL-II-4B |
4 |
400×1650 |
200 |
240 |
1 |
| YL-II-5B |
5 |
500×1750 |
300 |
360 |
1 |
| YL-II-6B |
6 |
600×1850 |
350 |
480 |
1.5 |
| YL-II-10B |
8--10 |
750×1900 |
500 |
720 |
1.5 |
| YL-II-18B |
12--18 |
900*2400 |
800 |
1040 |
2 |
| YL-II-25B |
20--25 |
1000*2200 |
1000 |
1440 |
2 |
| YL-II-35B |
30--35 |
1200*2400 |
1500 |
2000 |
3 |
| YL-II-50B |
40--50 |
1500*2400 |
2000 |
3200 |
3 |
){kind=link}