P Type Backwash Filter with 500 Micron Perforated Mesh
|FOB Price:||US $1,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $1,000/ Piece|
|Production Capacity:||100 Sets/Month|
|Transport Package:||Plywood Case Into Container|
|Payment Terms:||L/C, T/T, Paypal, Western Union|
- Model NO.: YL-4P
- Usage: Environmental Protection, Chemical Industry, Water Treatment
- Style: Vertical
- Certification: CE, SGS
- Filtration Degree: 450 to 3500 Micros
- Working Temperature: Less Than 100 Centigrade
- Electricity Power Supply: 220V,50Hz,
- Inlet and Outlet Diameter: Dn100mm/4inch
- Trademark: YLD
- Origin: Jiangyin, China
- Type: Water Filter
- Motive Force: Electric power
- Performance: Efficient Filtration
- Material: Carbon Steel,Ss304,Ss316,Ss316L,Ss2205
- Working Pressure: 0.6/1.0/1.6MPa
- Mesh: Ss304/Ss316/Ss316L
- Flow Rate: 80t/H
- Drain: 25mm/1 Inch
- Specification: to be based practical size
- HS Code: 842121999
P Type Backwash Filter With 500 Micron Perforated Mesh
Structure and work principle
P type backwashing drainage filter is made up of the high quality carbon steel cartridge, stainless steel wedge strainer of special structure, butterfly valve and drainage device. When the filter works, the butterfly valve will be open, the water flow gets into the filter through the entrance, after the filtering with the strainer to the exit. When the filter requires the drainage, the butterfly valve will close and the drainage valve will open. After the filtering with the first half of the strainer, part of the water flows into the system through the exit, The rest water will flow from the outer side of the second half of the strainer to the inner side. And it is discharged from the drainage exit. It is with the use of automatic backwashing of the strainer. Then during the whole washing process the system could run normally without stop.
Other techanical parameters sheet.
work pressure: less than 1.0MPa
work temperature: less than 100 Centigrate
Pressure loss: less than0.015MPa
Filtering precision: 300-100 micron
Other configurations: working pressure, filtration degree and the filter specification could be manufactured based on buyers' special requirement. The flange connection dimension is according to GB-9119.9-88.
Installation and use
P type backwashing drainage filter should be installed horizontally or vertically. When it is installed vertically, the direction of the water flow should be from top to bottom. Please take care the arrow direction on the shell should be the same with the water flow. The butterfly valve is open during the normal running. When taking the drainage, close the butterfly and turn on the drainage valve until the clean water is discharged. Close the drainage valve and turn on the butterfly valve, then the drainage process is finished and the equipment gets into the normal running state.
01. What is the capacity (m3/hour)you required for this equipment?
02. What is the material for this filter?
Carbon steel ?or stainless steel (SS304/SS316)?
03. What is the filtration degree?
500 micron or 1000 micron?
Technical parameters sheet
Inlet and outlet diameter
Max flow (T/h)