Water Sand separation Hydrocyclone Desander for Irrigation

• Customization: Available
• Type: Filter
• Usage: Environmental Protection, Chemical Industry, Water Treatment
• Model NO.: YLXC-80II
• Style: Vertical
• Performance: Efficient Filtration
• Certification: CE
• Product Name: Water Sand Seperation Hydrocyclone Desander
• Material: Carbon Steel/Stainless Steel304//Ss316
• Flow Rate: 60m3/H
• Inlet and Outlet: Dn80mm
• Desanding Diameter: More Than0.1mm
• Turbidity of Raw Water: More Than300 Degrees
• Output Water Turbidity: Less Than10 Degrees
• Input Water Pressure: More Than0.2-0.25MPa
• Water Head Loss: Less Than0.02MPa
• Working Temperature: Normal
• Transport Package: Plywood Case Into Container
• Specification: CE, SGS
• Trademark: YLD
• Origin: Jiangyin, Jiangsu, China
• HS Code: 8421219990
• Production Capacity: 5000 Sets/Year

Product Description

Water Sand Seperation Hydrocyclone Desander For Irrigation  

 

Product Description

How does a cyclone separator work?

The particles of dust and dirt that enter the cyclone are heavier than the air that surrounds them. Because of this, more force is needed to keep the debris continuously moving in a circular motion, although the force of the air that is inside the chamber isn't that strong. As the air continues to spin, the heavier particles of dirt and dust begin to separate from the other debris and move toward the walls of the chamber, sliding to the bottom of the container's dust bin.
The clean air that is located at the bottom of the cyclone begins to change directions as it moves up the center of the container's cylinder. From there the clean air travels to an exhaust tube or outlet that is usually attached to a filter that catches fine particles of debris that remain in the air. Cyclone separators are also used to remove pollutants from the air, gas and water.
There are a variety of cyclone separators that are used to perform these jobs that generally function in the same way by separating larger particles of debris from the air or other substances. These include cyclone grease separators, horizontal dust collectors, multiple cyclone separators, secondary airflow separators and hydrocyclonic separators.
 

Product characteristics:
 
1.No energy consumption, good sand removing effect, especially suitable for sand content higher system using.
 
2.Low cost, convenient installation and operation, safe and reliable operation, small size, processing a large quantity of water, small occupied area.

MAINTENANCE
 
Apply a layer of grease to handle threads once a year. 
 
Immediately repair any damage to the tank's protective coating.
 

Product Parameters

FAQ:

1. What is capacity(m3/h or gpm)do you require?
2. What is the material do you want?--SS or carbon steel?
3. What is the operation do you want?---By manual or automatic?

Technical parameters:

Model	Flow rate (T/h)	Inlet & outlet dia. (mm)	Darin dia. (mm)	D (mm)	H (mm)	Weight (kg)
YLXC-25II	18	25	25	273	1100	40
YLXC-40II	25	40	25	273	150	50
YLXC-50II	40	50	25	273	1300	60
YLXC-80II	60	80	40	325	1350	120
YLXC-100II	100	100	40	377	1400	130
YLXC-125II	160	125	50	377	1500	180
YLXC-150II	200	150	50	426	1600	240
YLXC-200II	250	200	65	530	1700	350
YLXC-250II	300	250	65	630	1800	400
YLXC-300II	500	300	65	720	1900	480

 

Installation Instructions

1. Hydrocyclone sand separator should be installed in the main pipe of water supply network and fixed on the base, we need to add a bypass between the inlet and outlet.

 
2. In order to ensure smooth water flow in front of the device should be installed intake and intake period equal diameter of straight pipe length equivalent to 10 to 15 times the diameter of the intake.
 
3. The equipment should be installed around the reserve has enough space for maintenance.
 
4.During normal operation, the need to open the inlet and outlet valves, close the drain valve and bypass valve.
 
5.depending on how much sand content of regular source of water decontamination platoon sand, open the drain valve at the sewage, water can flow out until the sewage process does not affect the normal use of water.
 
6.After sewage, close the drain valve.
 
7. If lack of sand discharge pressure, close the valve at the outlet.
 

 

Certifications

Packaging & Shipping

TO SHANGHAI  NIBONG  QINGDAO TIANJING GUANGDONG PORT

Package with plywood case

Company Profile

Development History:
2000: Jiangyin YLD was founded.
2004:Jiangyin YLD change to Jiangsu YLD, registered fund from 50 ten thousand to 500 million, factory area from 1500m² to 15000 m².
2005: From 2005 year to now, every year credit rating was awarded "AAA" .
2007: Jiangyin science and technology bureau granted YLD "JIANGYIN ENGINEERING AND RESEARCH CENTER FOR WATER FILTER AND ULTRAVIOLET STERILIZATION"
2009: Open the foreign market, the products were sold abroad, Canada, USA, Singapore and so on.
2010: YLD Trademark was registered successful.
2012: The formal establishment of the ministry of foreign trade opened up more foreign markets.
2014: Patented by many products independently researched and developed by the company.
2015: The self-developed multi-cartridge automatic backwash filter was rated as a high-tech product and obtained a certificate.
2016: The company was rated as a scientific and technological enterprise and a high-tech enterprise in Jiangsu Province.
2019: The company got "Manufacture License of Special Equipment People's Republic of China".
2020: Awarded the title of "Loving Enterprise" by the government and "Quality Supplier" by suppliers

After Sales Service

We provide 24 hours online customer service.

Any inquiry about water treatment system, please feel free to contact me for further details!

Guarantee period:1 year