Ion Exchange Resin Regeneration Skid-Mounted Single Tank 4m3/Hr Water Softener

• Water Hardness of Raw Water: <8mmol/L
• Turbidity of Raw Water: <5ntu
• Water Output: <0.03mmol/L
• Working Pressure: 0.2-0.4MPa
• Control for Regeneration: Flow Rate Based Control
• Working Temperature: 5 to 50 Centigrade
• Model NO.: YL-I-4
• Free Chlorine: <0.5mg/L
• Water Temperature: 5-45 Centigrade
• Iron Content: <0.3mg/L
• Suspended Solid: <0.5mg/L
• Transport Package: Plywood Pallets Into Container
• Specification: refer to parameters sheet or to be customized
• Trademark: YLD
• Origin: Jiangyin, China
• HS Code: 8421219990
• Production Capacity: 100 Setts/Month

Product Description

Single Resin Tank Ion Exchange Resin Softening Type Water Softener

How Water Softeners Work
The best way to learn about how water softeners work is to book one of our demonstrations, you'll be able to see softened water in action from your own tap.
In brief, water softeners are designed to remove calcium and magnesium (the cause of scale and scum) from hard water. They are intended to treat the whole house, so are installed where the water supply enters the premises.

Ion Exchange
Water softening happens through a process called ion exchange, which uses an ion exchange resin. The resin comprises of tiny polymeric beads which are specially formulated so that they can be charged with certain ions. Calcium and magnesium, the causes of scale and scum from hard water, are referred to as ions, and as water passes through the resin, the calcium and magnesium ions swap places with the sodium ions on the resin. Sodium salts, unlike calcium and magnesium, are highly soluble so sodium does not cause scale or scum. When all the sodium ions have been exchanged for calcium or magnesium, the resin must be regenerated by recharging it with sodium ions. This is done by flushing the resin with salt solution (brine).


Type choice:
Softener equipment applies cation resin for softing raw water,its main target is to use cation resin to adsorp (main parts of ),encreasing the hardness of raw water.
1. Users can choose manual operation control system for saving cost.
2. If users using for 24 hours can accord to water using time choosing for rebirth
3. Uses can according to water quality requirement:first grade multi-media filter,which can remove mud,rust,colloid and suspension in water.Second grade activated carbon filter,which can remove color,olfactory,biochemistry organic in water and encrease the left oxygen value and pollution in water.Third grade equiped softener equipment.
4. Effluent water capacity achieves the water supply of national low-pressure bioler.
5. Time control- type;flow control- type.In working ,apply single-tank,double-tank and multi-tank etc. other varied combination method.When choosing,users can choose as their needs.In operation,it has not only automatic function,but also is manual operation.
 
Technical Parameters
Type I : Single-tank and single-valve( flow rate based control) 

Model	water output (m³/hour)	Resin-Tank<mm> (diameter*Height)	Brine tank (Liter)	Resin (kg)	connecting pipe(inch)
YL-I-0.5	0.5	200×1200	60	20	3/4
YL-I-1	1	250×1400	60	40	3/4
YL-I-2	2	300×1400	100	60	1
YL-I-3	3	350×1650	200	80	1
YL-I-4	4	400×1650	200	120	1
YL-I-5	5	500×1800	200	180	1
YL-I-6	6	600×1850	350	240	1.5
YL-I-10	10	750×1850	500	360	1.5
YL-I-16	16	900*2200	1000	520	2
YL-I-20	20	1000*2200	1500	720	2
YL-I-28	28	1200*2400	2000	1000	3
YL-I-50	50	1500*2400	2000	1600	3

 
Type II.dual-tank and dual-valve, two tanks work simultaneously but regenerate at different time

Model	water output (m³/hour)	Resin-tank<mm> (diameter*Height)	Brine-tank(Liter)		Resin (kg)	connecting pipe(inch)
YL-II-0.5A	0.5	200×1200	60		40	3/4
YL-II-1A	1	250×1400		60	80	3/4
YL-II-2A	2	300×1400	100		120	1
YL-II-3A	3	350×1650	200		160	1
YL-II-4A	4	400×1800	200		240	1
YL-II-5A	5	500×1800	200		360	1
YL-II-6A	6	600×1850	350		480	1.5
YL-II-10A	10	750×1850	500		720	1.5
YL-II-18A	14-18	900×1850	500		720	1.5
YL-II-25A	20--25	750*1850	500		720	2
YL-II-36A	30--36	900*1900	800		1040	3
YL-II-50A	45--50	1200*2400	1000		1440	3
YL-II-70A	60--70	1200*2400	1500		2000	3
YL-II-100A	80--100	1500*2500	2000		3200	3

 
Type III.:dual-tank and single valve,one work one standby 

Model	water output	Resin-tank<mm>	Brine tank (Liter)		Resin (kg)	connecting pipe(inch)
	m³/hour	(diameter*Height)
YL-II-1B	1	250×1400		60	80	3/4
YL-II-2B	2	300×1400	100		120	1
YL-II-3B	3	350×1400	100		160	1
YL-II-4B	4	400×1650	200		240	1
YL-II-5B	5	500×1750	300		360	1
YL-II-6B	6	600×1850	350		480	1.5
YL-II-10B	8--10	750×1900	500		720	1.5
YL-II-18B	12--18	900*2400	800		1040	2
YL-II-25B	20--25	1000*2200	1000		1440	2
YL-II-35B	30--35	1200*2400	1500		2000	3
YL-II-50B	40--50	1500*2400	2000		3200	3