SS Screen Strainer Anthracite Water Treatment to Remove Suspended Particles
Features:
Anthracite filter is especially selected minerals from the deep well, with the highest percentage of carbon. Anthracite filter using artificial classification, can reduce extraneous minerals and lower ash content. By filtering and washing. Anthracite filter is especially selected minerals from the deep well, with the highest percentage of carbon. Water filter using artificial classification, can reduce extraneous minerals and lower ash content. Water filter through the filtering and washing, ensure the suitable water filtration with. The ability to maintain a good solid particles, so the anthracite can reliably improve the ability to remove suspended particles. In addition, its low coefficient of uniformity, to help speed up the flow.
Colour |
Black |
Carbon content |
85 |
SG |
1.65 + 0.05 |
Alkali water soluble |
0.7 + 0.3 |
Acid soluble |
0.7 + 0.3 |
Water soluble acid |
≤2% |
Hardness |
Mohs hardness, 3.0 to 3.5 degrees |
Density |
52 pounds per cubic foot |
Particle size |
0.60 - 62.00 mm |
Effect of quality anthracite filter media plays in the filtering process, directly affect the filtration of water, so the choice of this filter must meet the following requirements:
High mechanical strength, breakage and wear rate and should not be greater than 3% (percentage by weight).
The chemical properties of stability, no toxic substances. In general acidic, alkaline, neutral water insoluble. Products manufactured by the China water treatment media supervision and test center measured: hydrochloric acid soluble rate is 0.68% (ministerial standard is 3.5) can achieve good purifying effect in all kinds of water.
The particle size distribution is reasonable, specific surface area. The appearance of the product is spherical and angular, good gloss, mechanical vibration three times screening, grading conform to the relevant technical indexes. Uniformity coefficient (K60) of not more than 1.5 (Japan), uniformity coefficient (K80) between 1.6-2.0, void ratio greater than 50%.
The range of particle size is smaller than the minimum size specified by weight not more than 5%, greater than the specified maximum size not larger than 5% by weight.
FAQ:
01. how small a solid needs to be removed,
02. how dirty the water is,
03. how the water will be used once it is filtered,
04. and the source of backwash water needed to clean the filters.
Specifications:
| TPYE |
TANK SIZE
(mm) |
TOTAL HIGH
(mm) |
FLOW RATE
(m3/hr) |
INLET AND OUTLET
(mm) |
ACTIVATED CARBON
(t) |
| YLD500 |
500*1500 |
2350 |
~2 |
DN32 |
0.11 |
| YLD 600 |
600*1500 |
2380 |
2-3 |
DN32 |
0.16 |
| YLD 700 |
700*1500 |
2400 |
~4 |
DN40 |
0.22 |
| YLD 800 |
800*1500 |
2400 |
~5 |
DN40 |
0.3 |
| YLD 900 |
900*1500 |
2500 |
~6 |
DN50 |
0.36 |
| YLD 1000 |
1000*1500 |
2600 |
~8 |
DN50 |
0.45 |
| YLD 1200 |
1200*1500 |
2700 |
~11 |
DN65 |
0.65 |
| YLD 1400 |
1400*1500 |
2800 |
~15 |
DN65 |
0.86 |
| YLD 1500 |
1500*1500 |
2850 |
~18 |
DN65 |
1 |
| YLD 1600 |
1600*1500 |
2900 |
~20 |
DN80 |
1.2 |
| YLD 1800 |
1800*1500
1800*1800 |
3000 |
~25 |
DN80 |
1.5 |
| YLD 2000 |
2000*1500 |
3100 |
~30 |
DN100 |
1.8 |
| YLD 2200 |
2200*1500 |
3180 |
~38 |
DN100 |
2.2 |
| YLD 2400 |
2400*1500 |
3330 |
~45 |
DN100 |
2.5 |
| YLD 2500 |
2500*1500 |
3380 |
~50 |
DN100 |
2.8 |
| YLD 2600 |
2600*1500 |
3430 |
~55 |
DN125 |
3 |
| YLD 2800 |
2800*1500 |
3530 |
~60 |
DN125 |
3.5 |
| YLD 3000 |
3000*1500 |
3630 |
70-80 |
DN125 |
4 |
| YLD 3200 |
3200*1500 |
3730 |
80~100 |
DN150 |
4.5 |
){kind=link}