High Quality 304 Stainless Steel Bag Filter Housing, SS Bag Filter
Bag Filter Housing is designed for optimum filtration performance. The range of SS Bag Filter Housing provides filtration solution for a broad variety of fluid applications in the process industry. SS Bag Filter Housing is particularly useful for filtering large volumes of high viscosity liquids. SS Bag Filter Housing is constructed of filter housing, filter bags, internal cage to support bags, positive sealing arrangement, and choice of end connections. The internal supports ensure that bags will not burst, as high differential pressures build up during operation.
Operation
Unfiltered fluid enters the housing and is distributed evenly around the filter bags. Filtration takes place from inside to outside. Solids are collected on the inside of filter bag for easy removal. The filtered fluid then exits through the outlet pipe.
The sizes of these pores are between the 1-300 micron.
The capacity depends on the surface area from the bags. Bigger systems can clean up to more than 500 m3 /h (multi bag filters)
There are special bags for various chemicals.
Engineering
The liquid flows from the top of the filter house (manufactured in either stainless or epoxy coated carbon steel) and is distributed equally amongst the bags. The liquid comes out at the bottom leaving the dirt behind.
Since the bag is locked in at the top of the vessel all the dirt is trapped inside the bag. The filter vessel never requires cleaning after use.
Bag filters systems are applied is various industries solutions. Treated liquids include: milk products, paint, lime, beer etc.
It can also help you with replacement from various filter bags.
01.Small probability for side-bag leakage , which effectively guarantee the filtering quality.
02.Bag type filter can bear greater working pressure, it is of small pressure loss,low operation cost and obvious energy saving .
03.Accuracy of filtration bag increased continuously, it could reach 0.5 μm at most.
04.Bag type filter large handling capacity, small volume, containing a large quantity of pollutants.
05.Based on the working principle and structure of Bag type filtering system,which is convenient to replace the filter bag and without cleaning,and time saving and labor saving.
06.Filtration bag could be use repeated after cleaning to save cost.
07.bag filter application scope is broad, with flexible operation and multiple installation .
Technical parameters of bag filter:
| Model |
Flow rate
(T/H) |
Inlet and outlet diameter(mm) |
Size |
Specification |
Bag specification
(mm) |
Filter area
(m2) |
| YL-1-219 |
20 |
DN50 |
219*410 |
Single bag |
180*410 |
0.23 |
| YL-2-219 |
40 |
DN65 |
219*810 |
Single bag |
180*810 |
0.46 |
| YL-2-400 |
50-80 |
DN80 |
400*810 |
Two bags |
180*810 |
0.92 |
| YL-2-500 |
120 |
DN100 |
500*810 |
Three bags |
180*810 |
1.38 |
| YL-2-600 |
150 |
DN125 |
600*810 |
Four bags |
180*810 |
1.8 |
| YL-2-650 |
160 |
DN125 |
650*810 |
Five bags |
180*810 |
1.84 |
| YL-2-750 |
200 |
DN150 |
750*810 |
Six bags |
180*810 |
2.3 |
| YL-2-800 |
220 |
DN150 |
800*810 |
Eight bags |
180*810 |
2.5 |
| YL-2-850 |
240 |
DN200 |
850*810 |
Nine bags |
180*810 |
2.76 |
){kind=link}