Our bag systems provide efficient and economical filtration. Some advantages to bag filtration are:
? Positive seal to assure zero fluid bypass
? Quick and easy installation
? Handles provide easy removal from housings
? High dirt holding capacity
? Sturdy construction to prevent bags from failing in operation
? 100% incinerable
Introduction:
Bag filter is a new filtration system, filter bag supported within the metal basket, the liquid flows into the inlet, filtered through the bag out from the exit, impurities were intercepted in the bag, the bag after the replacement can continue to use.
Classification of bag filter: single bag filter, multi bag filter, sandwich filter and plastic rubber filter
Bag filter works by pressure filtration. The bag filter comprises three sections: the filter vessel, a support wire basket, filter bags.
The liquid to be filtered from the top or side of the bag filter injected directly into the filter bag, a uniform distribution of the filter bag, there is no negative effect of turbulence; particles were filtered are trapped in the filter bag, the filter bag can be replaced or cleaning.
Bag filter types: single bag filter, multi bag filter. There insulation jacket with filters, duplex filters, filter carts move for selected customers.
Single bag filter model: the 1st filter, the 2nd filter, the filter on the 3rd, the 4th filters, the 5th filter.
Single bag filter forms: side-, top-in, little traffic.
Multi-bag filter Model: 2,3,4,5,6bag.
Multi-bag filter forms: boom-style, low boom, horizontal, double-intrusive
Material: Stainless steel SUS304, SUS316, PP polypropylene
Working principle
The liquid to be filtered by bag filter flows into the feed tube and go by the top of filter bag which is supported by a bracket, making the liquid averagely distributed onto the filter surface.The stream-line distribution of filter media is a uniform face, with no negative effect of turbulence. The liquid flows from the inside to the outside of the bag, the particals and impuritied filtered out are trapped in the bag, making the replacement of filter bags not pollute downstream liquid,and also making the filtration system cleaned easily. A handle is designed in the bag so that its replacement is quick and easy. The supporting filter bracket is punched by high-strength steel plate,may also made of stainless wire mesh,this provides bag filter system with a large and smooth filter surface, ensuring the big flow, small size, preventing migration of filter bag fiber, thus ensuring a high filtration efficiency.
Filter bag media are mainly the surface filter mesh material, depth filtration needle felt material.and deep absorption material. There can be installed specific magnetic bar, activated carbon,or diatomaceous earth in the filter bag, to remove iron impurities or adopt organic compounds.
Scope of application
1 Food and beverage industry: beer, wine, wine, sake, liquor, wine, fruit juice, bottled water, tea drinks, soy milk, syrup, dairy products, food additives, water filtration to clarify the process and CIP.
2 Petrochemical industry: all kinds of lubricants and oil, glue, chemical fiber manufacturing process of various solution was filtered.
3 Oil and gas industry: amine desulfurization, dehydration flux filter, oil field water, completion fluid filtration.
4 Car paint, painting industry: paint, electrophoretic paint, pre-treatment fluid, paint and paint raw materials and solvent filtration
5 Textile, printing and dyeing, paper making industry: spinning liquid, dyes, flux, water, additives, adhesives filter.
6 Edible oils and soap industry: polishing purification of edible oil, soap raw materials and water filtration.
7 Pharmaceutical industry: a variety of pharmaceutical intermediates, pharmaceutical raw materials, solvent filtration.
8 The electronic and electroplating industry: a variety of plating solution and water filtration.
9 Machining industry: a variety of cutting fluid, coolant and cleaning liquid filtration.
10 Other liquid filtration.
Technical parameters:
1.Design pressure: no more than 0.6Mpa
2.Work pressure: 0.1-0.4Mpa
3.Design temperature: normal temperature
4.Sealing material: butyl rubber, silicone, fluorine rubber standard, standard configuration is silic a gel seal
5.Interface form: threaded, bar clasp, GB standard flange
6.Surface treatment: mirror polishing, electrolytic polishing, sandblast external surface
7.Filtration precision: 1um-100um
8.Material: SUS304, SUS316, SUS316L
| Model |
Flow rate
(T/H) |
inlet and outlet diameter |
Quantity of the bags |
Filter size |
Bag Specifications |
Filtration Area
(M2) |
YL-1-219 |
20 |
DN50mm |
1 |
219*410 |
180*410 |
0.23 |
YL-2-219 |
40 |
DN65mm |
1 |
219*810 |
180*410 |
0.46 |
YL-2-400 |
50-80 |
DN80mm |
2 |
400*810 |
180*810 |
0.92 |
YL-2-500 |
120 |
DN100mm |
3 |
500*810 |
180*810 |
1.38 |
YL-2-550 |
140 |
DN100mm |
4 |
5500*810 |
180*810 |
1.8 |
YL-2-600 |
150 |
DN125mm |
4 |
600*810 |
180*810 |
1.8 |
YL-2-650 |
160 |
DN125mm |
5 |
650*810 |
180*810 |
1.84 |
YL-2-750 |
200 |
DN150mm |
6 |
750*810 |
180*810 |
2.3 |
YL-2-800 |
220 |
DN100mm |
8 |
800*810 |
180*810 |
2.5 |
YL-2-850 |
240 |
DN200mm |
9 |
850*810 |
180*810 |
2.76 |
Audited Supplier 
){kind=link}
){kind=link}