Steamed Bolier Water Automatic Water Softener for Water Purification
Product Description
Industrial Water Softeners
Engineering commercial and industrial water softeners are the result of nearly half a century of experience in the design and manufacture of quality water treatment equipment that meets the exacting demands of commercial and industrial water users. Nancrede Engineering industrial water systems feature unique, patented engineering innovations to provide greater efficiency, more capacity, higher flow rates, higher system reliability, and lower operating costs.
Typical Industrial Water Softener Applications
Dairies, schools, factories, hospitals, laundries, car washes, nursing homes, boiler feed water, food industry plants, municipal water works, apartments and condominiums, motels, hotels, resorts, manufacturing facilities, institutional facilities, office complexes, cooling towers, farms…each could benefit from the installation of a Nancrede Engineering water softener. The system quickly begins paying for itself through reduced energy consumption, extended water appliance life, and lower plumbing repairs. Water heaters and boilers will last longer; costly special chemicals for boilers and steam handling equipment can be greatly reduced; the service life of linens, clothing, fixtures and appliances will be noticeably extended; and process water will be more consistent and efficient.
How Dual Tank Water Softeners Work
"Twin Tank Water Softeners" have "2" resin tanks and 1 brine or salt tank.Dual tank systems also regenerate on-demand. But they have an immediate advantage.When you hit capacity on 1 tank, the system immediately switches over to the 2nd tank.No reserve capacity is required. No delayed regeneration in the middle of the night.You maintain even, soft water under all circumstances.Twin Tank Water Softeners also have the luxury of using soft water for all cycles during regeneration. Again, think of washing dishes in soft, clean water. Soft water regeneration is much more effective.
Working principle
01. By means of Absorbing the calcium and magnesium ions in water with resin, since the hardness of water is mainly composed of calcium and magnesium, in general, we adopt cation exchange resin (softener), replace Ca2+, Mg2+ (main ingredients for scale) in water, as the increase of Ca2+ and Mg2+ in resin, removing performance on Ca2+, Mg2+ of resin will gradually reduce.
02. When the resin has absorbed a certain amount of calcium and magnesium ions, it must be regenerated, the regeneration process is that flush resin layer with the salt water in salt box, replace hardness ion out of the resin again, and discharged from the tank with waste liquid of regeneration, then resin resumed the function of softening and exchanging.
03. The principle of sodium ion exchange and softening treatment is to exchange cation in the raw water with resin, hardness constituents Ca2+and Mg2+ in water exchange Na+ in resin, thus absorb the Ca2+and Mg2+ to make the water to be softened.
2RNa + Ca2+ = R2Ca + 2Na+
2RNa + Mg2+ = R2Mg + 2Na+
After the water treated by sodium ion exchanger, the Ca+ and Mg+ were superseded by Na +.
Application scope of softener
Mainly used in industry and civil water softening preparation, such as Boiler feed water make-up water, air conditioning system make up water, heat exchanger, power plant, chemical, textile, printing and dyeing, bio-pharmaceutical, Electronic system and water pretreatment.
Control mode of fully automatic water softener
(1)Single tank time type: It adopts microcomputer to control the time, when operation of the equipment reaches setting time, it will automatically enter the regeneration condition, which can be regenerated for once a day or once for some day.
(2)Single tank flow type: It adopts control of turbine flow or electronic flow sensor, when the yield of softener reaches preset flow it will automatically enter the regeneration condition, which can be recycled many times every day.
(3)Double tanks flow type: Which could be divided into one running-one alternating, and simultaneous running and separately regeneration.
(4) One running and the other alternation type: One tank is running while the other is alternating, when water yield of operating tank reaches the preset flow rate, it will enter the regeneration stage, meanwhile, the other tank will enter the working state, these two tanks work and regenerate alternatively to realize continuous water supplying of 24 hours.
(5)Simultaneous running and separately regeneration type: Two cans running simultaneously, when the flow rate reaches the setting rate, one tank (can) will regenerate and the other tank will output water continuously, when the first regeneration tank finish the regeneration it will enter the working stage, the other one will enter regeneration stage, these two cans finish regeneration and enter working state simultaneously.
Product Parameters
| Category |
Model |
Recommended water yield
(M³/h) |
Tank size
Diameter *Height(mm) |
Salt box
(L) |
Amount of resin(KG) |
Single-valve
and single-tank |
YL-I-0.5 |
0.5 |
200×900 |
25 |
20 |
| YL-I-1 |
1 |
250×1400 |
60 |
40 |
| YL-I-2 |
2 |
300×1400 |
200 |
60 |
| YL-I-3 |
3 |
350×1400 |
100 |
80 |
| YL-I-4 |
4 |
400×1650 |
200 |
120 |
| YL-I-5 |
5 |
500×1750 |
300 |
180 |
| YL-I-6 |
6 |
300×1900 |
350 |
240 |
| YL-I-10 |
8-10 |
750×1900 |
500 |
360 |
| YL-I-18 |
42-18 |
900×1900 |
800 |
520 |
| YL-I-25 |
18-25 |
1000×2200 |
1000 |
720 |
| YL-I-35 |
25-30 |
1200×2400 |
1500 |
1000 |
| YL-I-50 |
35-50 |
1500×2500 |
2000 |
6400 |
Dual-valve and
dual-tank
(simultaneous
operation
and respective regeneration) |
YL-II-36 |
24-36 |
900×1900 |
800 |
1040 |
| YL-II-50 |
36-50 |
1000×2200 |
1000 |
1440 |
| YL-II-70 |
50-70 |
1200×2400 |
1500 |
2000 |
| YL-II-100 |
70-100 |
1500×2500 |
2000 |
3200 |
Dual-valve and
dual-tank
(One for use and
the other for standby) |
YL-II-1 |
1 |
250×1400 |
60 |
80 |
| YL-II-2 |
2 |
300×1400 |
100 |
120 |
| YL-II-3 |
3 |
350×1400 |
100 |
160 |
| YL-II-4 |
4 |
400×1650 |
200 |
240 |
| YL-II-5 |
5 |
500×1750 |
300 |
360 |
| YL-II-6 |
6 |
600×1900 |
350 |
480 |
| YL-II-10 |
8-10 |
750×1900 |
500 |
720 |
| YL-II-18 |
12-18 |
900×1900 |
800 |
1040 |
| YL-II-25 |
18-25 |
1000×2200 |
1000 |
1440 |
| YL-II-35 |
25-35 |
1200×2400 |
1500 |
2000 |
| YL-II-50 |
35-50 |
1500×2500 |
2000 |
3200 |
Dual-valve and
dual-tank(JK) |
JK25-150 |
0.2-0.3 |
200×900×2pcs |
25 |
40 |
| JK25-200 |
0.5-0.6 |
200×1200×2pcs |
60 |
80 |
| JK25-250 |
0.8-1.0 |
250×1400×2pcs |
60 |
120 |
| JK25-300 |
1.8-2.0 |
300×1400×2pcs |
100 |
200 |
| JK25-350 |
2.8-3.0 |
350×1650×2pcs |
100 |
240 |
| JK25-400 |
3.5-4.0 |
400×1650×2pcs |
200 |
40 |
Certifications
Packaging & Shipping
TO SHANGHAI NIBONG QINGDAO TIANJING GUANGDONG PORT
Package with plywood case
After Sales Service
We provide 24 hours online customer service.
Any inquiry about water treatment system, please feel free to contact me for further details!
Official website: yldwater.en.made-in-china.com
Guarantee period:1 year
){kind=link}