Bag Filter Vessel With 1 Micron PP/ PE Filter Sock
Bag filters remove large solids and particulates from fluids and are provided for treatment of flows from 5 to 5,000 GPM. Replaceable bag filters are available for high solids holding capacity from 1 to 100 micron nominal rating. These filters can be applied to a wide variety of filtration applications and will allow you to meet or exceed discharge requirements. Single, duplex and multi-bag housings can be provided individually and as skid-mounted systems able to operate at up to 150 PSI, these filters can be operated either as stand-alone units in sediment filtration or manifolded with other treatment equipment.
Features:
Bag filter systems can be provided in single or in parallel/series orientation depending on the project needs.
The filter construction can be coated carbon steel, aluminum, 304/316 SS or polypropylene.
When provided in parallel or series mounting a piping manifold is provided for inlet and outlet. Piping is typically schedule 80 PVC, but can change depending on application requirements.
Four lengths available, 6-, 12-, 15-, and 30-inch, depending upon the required surface area and volume of fluid to be filtered
Carbon steel and 304 or 316 Stainless Steel material
Each vessel is factory hydro-tested
Low pressure drop
Quick-swing strap band closure
Differential, drain, and vent ports
304 Stainless Steel strainer basket in Carbon Steel and 304 Stainless Steel Housings
316 Stainless Steel straner basket in 316 Stainless Steel housing
Accepts #1, #2, #3, #4 and #12-size bag filters, depending on model
Two-part epoxy paint finish on carbon vessels
Adjustable support legs included
Performance:
Filter bag ratings available:
- Polypropylene bags: 1, 5, 10, 25, 50,100 micron.
AAA:
01. What is the capacity (m3/hour)you required for this equipment?
02. What is the material for this bag filter?
Stainless steel (SS304/SS316)?
03. What is the working pressure for it?
04. What is the filtration degree?
10 micron or 200 micron?
Technical parameters of bag filter:
| Model |
Flow rate
(T/H) |
Inlet and outlet diameter(mm) |
Size |
Specification |
Bag specification
(mm) |
Filter area
(m2) |
| YL-1-219 |
20 |
DN50 |
219*410 |
Single bag |
180*410 |
0.23 |
| YL-2-219 |
40 |
DN65 |
219*810 |
Single bag |
180*810 |
0.46 |
| YL-2-400 |
50-80 |
DN80 |
400*810 |
Two bags |
180*810 |
0.92 |
| YL-2-500 |
120 |
DN100 |
500*810 |
Three bags |
180*810 |
1.38 |
| YL-2-600 |
150 |
DN125 |
600*810 |
Four bags |
180*810 |
1.8 |
| YL-2-650 |
160 |
DN125 |
650*810 |
Five bags |
180*810 |
1.84 |
| YL-2-750 |
200 |
DN150 |
750*810 |
Six bags |
180*810 |
2.3 |
| YL-2-800 |
220 |
DN150 |
800*810 |
Eight bags |
180*810 |
2.5 |
| YL-2-850 |
240 |
DN200 |
850*810 |
Nine bags |
180*810 |
2.76 |
){kind=link}