Compact Cabinet Water Softener automatic regeneration
Advantages
compact, aesthetic design, small footprint
automatic regeneration
long lifespan
easy installation
The cabinet water softeners are compact, small footprint equipments. The set-up and installation is simple. The equipment performs automatically the regeneration of the saturated resin with using the purified regenerating salt tablet which is filled into the cabinet. The launch of the regeneration can be programmed time or volume controlled.
The launch of regeneration of the time controlled equipment can be set by end-user. Application is suggested in permanent, even water consumption. The volume controlled equipment launches regeneration by the measured quantity of the softened water.
Fields of application
soft water supply of flats, houses
low soft water need industrial technologies
Working principle
01. By means of Absorbing the calcium and magnesium ions in water with resin, since the hardness of water is mainly composed of calcium and magnesium, in general, we adopt cation exchange resin (softener), replace Ca2+, Mg2+ (main ingredients for scale) in water, as the increase of Ca2+ and Mg2+ in resin, removing performance on Ca2+, Mg2+ of resin will gradually reduce.
02. When the resin has absorbed a certain amount of calcium and magnesium ions, it must be regenerated, the regeneration process is that flush resin layer with the salt water in salt box, replace hardness ion out of the resin again, and discharged from the tank with waste liquid of regeneration, then resin resumed the function of softening and exchanging.
03. The principle of sodium ion exchange and softening treatment is to exchange cation in the raw water with resin, hardness constituents Ca2+and Mg2+ in water exchange Na+ in resin, thus absorb the Ca2+and Mg2+ to make the water to be softened.
2RNa + Ca2+ = R2Ca + 2Na+
2RNa + Mg2+ = R2Mg + 2Na+
After the water treated by sodium ion exchanger, the Ca+ and Mg+ were superseded by Na +.
| Single tank fluid , |
model |
water output
(M 3 /Hour) |
dimension of can
diameter*height
(mm) |
salt box
(L) |
consumption on resin
(KG) |
Connecting pipe(inch) |
| YL-I-0.5 |
0.5 |
200×1200 |
60 |
25 |
3/4 |
| YL-I-1 |
1 |
250×1400 |
60 |
25 |
1 |
| YL-I-2 |
2 |
300×1400 |
100 |
50 |
1 |
| YL-I-3 |
3 |
350×1650 |
200 |
75 |
1 |
| YL-I-4 |
4 |
400×1800 |
200 |
100 |
1.5 |
| YL-I-5 |
5 |
500×1850 |
200 |
150 |
1.5 |
| YL-I-6 |
6 |
600×1850 |
200 |
200 |
1.5 |
| YL-I-10 |
10 |
750×2400 |
350 |
350 |
2 |
| YL-I-16 |
16 |
900×2400 |
1000 |
600 |
2 |
| YL-I-20 |
20 |
1000×2400 |
1500 |
700 |
3 |
| YL-I-28 |
28 |
1200×2400 |
2000 |
1000 |
3 |
| YL-I-50 |
50 |
1500×2400 |
2000 |
1500 |
3 |
Audited Supplier 
){kind=link}
){kind=link}