Water filter housing/bag filter housing/PP filter bag housing
Introduction
Filter Bag Housings are compact, space saving and designed for optimum filtration performance. The range provides filtration solutions for a broad variety of fluid applications in the process industry using bag filter technology. Filter Bag Housings are manufactured in accordance to meet the high demands of the process industries.
Equipment Connections can be NPT, BSP and ASA screwed or flanged in the different configurations to suit the customer's requirements. All bag filters vessels are compatible with all standard snap ring filter bags as well as our other custom designed bags. These can be supplied in single or multiple bags in a vessel assembly.
SS Bag Filter Housings are sealed with top seated Silicon/Viton .O. ring by positive tangential contact that eliminates accidental misplacement.
All SS Bag Filter Housings have been tested and passed the hydrostatic leak and burst pressure to ensure consistence safe performance.
Bag filters vessels can be manufactured to accept PP / Rubber / Snap collar bags of reputed make.
All filter vessels are supplied complete with SS retainer basket and standard rubber O-ring.
The liquid is filtered more effectively when there are any of the following conditions:
· Unequal Particle Size Distribution, in which First stage can handle larger particles, subsequent
· stages can filter finer particles.
· Greater Quality Control and Performance in which you can acquire improved performance with two
· filters (same micron) back-to-back for greater efficiency and capture rates.
· Cost Reduction Using Disposable Filters where less expensive pre-filters (disposable or reusable)
· can be used for the First stage, whereas "Absolute Rated" media can be used in the subsequent stage .
· parallel duplex or multiplex filter assemblies for uninterrupted flow and where frequent bag change outs are required.
· Fluid enters the housing above the filter bag or strainer basket; flows down into the housing; and continues
Working principle
Within the bag filter, under the action of pressure, the solution flows through the filter bag, the pollutants intercepted and the filtered residue will stranded in the bag. while the filtrate outflows along the metal bearing baskets wall, achieving the purpose of filtration.
SS Bag Filter Housings effectively removes dirt, pipe scale, and other contaminants from process liquids such as water, chemical and petroleum products. May be used as a strainer before a pump or as a filter after the pump.<o:p>
SS Filter housings come with SS retainer cage for bag supporting purpose. SS Bag Filter Housings also carry SS sealing disc for better sealing arrangement. SS Bag Filter Housings have inline configuration to minimize pressure drop. Flow direction is from inside to outside. They are rugged enough to withstand operating pressure up to 7 bar and temperature up to 70°C<o:p>
Major advantages
Low side leakage probability of the filter bag, ensuring the quality of filtration
Bag filter could bear greater pressure but with less pressure loss, obvious energy-saving effect but low running cost
The filtration precision of bag filter is continuously improved and now reaches 0.5 pm.
The bag filter has large capacity, small size and large amount of pollutant.
Based on the working principle and structure of bag filter system, the filter bag can be replaced conveniently and the filter is free for cleaning, saving time and labor.
The filter bag can be used repeatedly after cleaning, saving cost.
Bag filter is used widely and flexibly and it can be installed in many ways.
Technical parameters:
| Model |
Flow rate
(T/H) |
inlet and outlet diameter |
Quantity of the bags |
Filter size |
Bag Specifications |
Filtration Area
(M2) |
| YL-1-219 |
20 |
DN50mm |
1 |
219*410 |
180*410 |
0.23 |
| YL-2-219 |
40 |
DN65mm |
1 |
219*810 |
180*410 |
0.46 |
| YL-2-400 |
50-80 |
DN80mm |
2 |
400*810 |
180*810 |
0.92 |
| YL-2-500 |
120 |
DN100mm |
3 |
500*810 |
180*810 |
1.38 |
| YL-2-550 |
140 |
DN100mm |
4 |
5500*810 |
180*810 |
1.8 |
| YL-2-600 |
150 |
DN125mm |
4 |
600*810 |
180*810 |
1.8 |
| YL-2-650 |
160 |
DN125mm |
5 |
650*810 |
180*810 |
1.84 |
| YL-2-750 |
200 |
DN150mm |
6 |
750*810 |
180*810 |
2.3 |
| YL-2-800 |
220 |
DN100mm |
8 |
800*810 |
180*810 |
2.5 |
| YL-2-850 |
240 |
DN200mm |
9 |
850*810 |
180*810 |
2.76 |
Scope of application
They can be used in processing chemicals, petroleum derivatives, coolants, cutting oils, cleaning fluids, waxes, paints, inks, resins, varnishes, lacquers, pharmaceuticals, plasticisers, plastisols, food stuffs, vegetable oils and edible oils. They are particularly useful for filtering large volumes of high viscosity liquids.
FAQ
01. What is the capacity (m3/hour)you required for this equipment?
02. What is the material for this bag filter?
Stainless steel (SS304/SS316)?
03. What is the working pressure for it?
04. What is the filtration degree?
10 micron or 200 micron?
Packaging & Shipping
Normal Packing : wooden boxes packaging into container
FOB TO Shanghai
Audited Supplier 
){kind=link}
){kind=link}