10m3/h Cooling Tower Water Softener with one tank in use another tank in standby
installation for controller and refilling for resin
a.Before installation,the central pipe(with water lower distributor)be put into the 0.6mm below the central of resin-can,then cut the pipe and make a angle.then the central pipe will be sealed.(the central pipe and lower distributor has been installed before delivery,seal the entrance is to prevent the resin flow into the central pipe )
b. Put the resin into the resin-can through the around of central pipe,and the resin particles should be paved at the bottom.
c. The above processing should ensure the central pipe be at the central position of resin-can.
d.Take out the sealing tape from the central tube.
e. The upper distributor should be installed into the base of control valve,place the O ring,the central pipe insert the central pipe then fasten the connection.
f.point the controller to the central tube,rotate the valve clockwise till the valve fixed on the interface of resin-can.(during the installation, the central tube must insert the valve)
1.Principal: Industrial water softener for water treatment
When raw water with rigid ion passing resin in the exchanging cylinder, Ca2+,Mg2+ in water is exchanged and absorbed by Na+ in resin, wiping off Ca2+,Mg2+ and carbonate or non carbonate rigidity, is called softened water. The resin must be regenerated after absorbing some Ca2+,Mg2+, regeneration is washing resin layer using brine in salt box. Na+ in salt water exchange the rigid ion of resin into water, then discharged with regeneration liquid off the cylinder, recovering exchanging capacity, and continuously softening water.
Industrial water softener allows water equipment (boiler, radiators, water heaters, solar, etc.) will never scale, congestion and make it has a longer life. Put an end to security risks and equipment loss. Bathroom facilities(Glass shower room, mirror, bathtub, toilet, etc) use soft water, it will no more difficult to clean up the white stains and rust spots.In life we can save a lot of energy and trouble, and lady commonly used soft water bath have a good cosmetic effect.
Industrial water softener is belongs to daily using water, can not get rid of impurities, bacteria, viruses and heavy metals in the water. And its main function is softened water, not directly for drinking, general it need to use with drinking machine(Water purifier), so that to settle the problem of drinking water.
2.Features:Industrial water softener for water treatment
(1)Easy installation and low maintenance
(2) Long life and great performance
(3) Manual Valve or Fleck Valve available
(4) SS Jacket available
3.Applications:Industrial water softener for water treatment
(1)Make-up water for boilers
(2)Cafeteria-food service
(3)Classroom Labs
(4)Cooling towers
(5)Pools Ice Machines
(6)Vending machines
(7)Fountain Service
(8)Drinking water
(9)Facility Use
(10)Vechicle Wash
This equipment is widely used in steam and hot water boiler,heating exchange,food-stuff,paper printing and publishing,washing and dyeing,household,hotel,medical and pharmaceutical ,pure water production.
How Do Water Softeners Work?
Water softeners undergo a certain process to treat hard water. In this process, the supplied water will pass through a tank filled with charged ion resins. These rows of resins are usually charged with sodium ions (which is often considered as the most effective agent in treating hard water) or potassium ions to effectively "trap" all the unwanted scum behind. As water passes through the resin bed, the sodium or potassium ions are released into the liquid while chemically attracting all the calcium and magnesium mineral ions into the resin beads at the same time. This method of exchange is referred to as Ion Exchange and it is very necessary to make the water soft.
technical parameters for water softener:
water inlet pressure: 0.2Mpa-0.4Mpa
working ambient temperature: 5-50ºC
water system temperature: 5-45ºC
power supplying: 220V 50Hz/60Hz
power : 3W
water hardness: ≤8mmol/L
effluent hardness: ≤0.03mmol/L
resin model : 001×7strongly acidic cation-exchange resin
salt consumption: <160-240g/mol ( according to water quality)
| Category |
Model |
Recommended
water yield
(M³/h) |
Tank size
Diameter *Height(mm) |
Salt box
(L) |
Amount of resin(KG) |
Dual-valve and
dual-tank (simultaneous
operation and respective
regeneration) |
YL-II-36 |
24-36 |
900×1900 |
800 |
1040 |
| YL-II-50 |
36-50 |
1000×2200 |
1000 |
1440 |
| YL-II-70 |
50-70 |
1200×2400 |
1500 |
2000 |
| YL-II-100 |
70-100 |
1500×2500 |
2000 |
3200 |
Dual-valve and
dual-tank(One for
use and the other for standby) |
YL-II-1 |
1 |
250×1400 |
60 |
80 |
| YL-II-2 |
2 |
300×1400 |
100 |
120 |
| YL-II-3 |
3 |
350×1400 |
100 |
160 |
| YL-II-4 |
4 |
400×1650 |
200 |
240 |
| YL-II-5 |
5 |
500×1750 |
300 |
360 |
| YL-II-6 |
6 |
600×1900 |
350 |
480 |
| YL-II-10 |
8-10 |
750×1900 |
500 |
720 |
| YL-II-18 |
12-18 |
900×1900 |
800 |
1040 |
| YL-II-25 |
18-25 |
1000×2200 |
1000 |
1440 |
| YL-II-35 |
25-35 |
1200×2400 |
1500 |
2000 |
| YL-II-50 |
35-50 |
1500×2500 |
2000 |
3200 |
){kind=link}
){kind=link}