FRP Resin Tank Water Softener for Bathing and Washing

• Customization: Available
• Installation: Vertical Type
• Working Principle: Ion Exchange
• Model NO.: YL-I-1
• Certification: CE
• Inlet Mode: Pipeline
• Heating Mode: No
• Control Mode: Flow Rate Type, Time Type
• Resin: 001×7 Strong Acidic Cation-Exchange
• Working Ambient Temperature: 5-50centigrade
• Relative Humidity: Less Than 95%(25centigrade)
• Hardness of Raw Water: Less Than 8mmol/L
• Hardness of Effluent: Less Than 0.03mmol/L
• Inlet Water Pressure: 0.2 to 0.4MPa
• Free Chlorine: Less Than 0.3mg/L
• Suspended Solid: Less Than 0.5mg/L
• Iron Content: Less Than 0.3mg/L
• Transport Package: Plywood Case Into Container
• Specification: CE, GSG
• Trademark: YLD
• Origin: Jiangyin, Jiangsu, China
• HS Code: 8421219990
• Production Capacity: 5000 Set/Year

Product Description

FRP Resin Tank Water Softener For Bathing And Washing 



What is water softener?


1. Water softener is such kind of equipment that used to reduce the hardness of the water.

2. It's main functions: Remove the dissolved Ca+, Mg+, etc., activated the water quality,
Sterilization and algae killing, anti-fouling and dissolve fouling.

3. It can be used for air conditioning system supplies water softening and daily life water treatment etc.

4. The system has widely applied in hot water boiler, heat exchange system, industrial cooling system,
Central air-conditioning system and other water equipment system.


Why we need water softeners?
 
 
Why do we need water softener?
 
The hard water can't be discerned easily.
 
The water presented white precipitate after placed in normal temperature, or boiling water contains lots of white sediments,
 
bath and toilet flush left scale, indicate high hardness of the water.Leaving stains and rings in tubs and showers, or your drinking water doesn't taste "right".
 
Then, the Water softener will be a perfect solution. Remove the chemical and mineral impurities like calcium and magnesium in water.

Hardness of raw water	Less than 8mmol/L	Power supply	220V/50HZ
Hardness of effluent	Less than 0.6mmol/L	Control mode	flow rate type, time type
Inlet water pressure	0.2to 0.4Mpa	Resin	001×7strong acidic cation-exchange
Free chlorine	Less than 0.3mg/L	Working ambient temperature	5-50Centigrade
Suspended solid	Less than 0.5mg/L	System water temperature	5-45Centigrade
Iron content	Less than 0.3mg/L	Relative humidity	Less than 95%(25Centigrade)

 FAQ:
01.What is the capacity(cubic meter per hour)for this water softener?--VERY IMPORTNT for our quotation.
02.What is the working hours for this water softner each day?is it continuous 24 hours working or not?
03.What is the power supply in your country?

configuration table:
 

Category	Model	Recommended water yield (M³/h)	Tank size Diameter *Height(mm)	Salt box (L)	Amount of resin(KG)
Single-valve and single-tank	YL-I-0.5	0.5	200×900	25	20
	YL-I-1	1	250×1400	60	40
	YL-I-2	2	300×1400	200	60
	YL-I-3	3	350×1400	100	80
	YL-I-4	4	400×1650	200	120
	YL-I-5	5	500×1750	300	180
	YL-I-6	6	300×1900	350	240
	YL-I-10	8-10	750×1900	500	360
	YL-I-18	42-18	900×1900	800	520
	YL-I-25	18-25	1000×2200	1000	720
	YL-I-35	25-30	1200×2400	1500	1000
	YL-I-50	35-50	1500×2500	2000	6400
Dual-valve and dual-tank (simultaneous operation and respective regeneration)	YL-II-36	24-36	900×1900	800	1040
	YL-II-50	36-50	1000×2200	1000	1440
	YL-II-70	50-70	1200×2400	1500	2000
	YL-II-100	70-100	1500×2500	2000	3200
Dual-valve and dual-tank(One for use and the other for standby)	YL-II-1	1	250×1400	60	80
	YL-II-2	2	300×1400	100	120
	YL-II-3	3	350×1400	100	160
	YL-II-4	4	400×1650	200	240
	YL-II-5	5	500×1750	300	360
	YL-II-6	6	600×1900	350	480
	YL-II-10	8-10	750×1900	500	720
	YL-II-18	12-18	900×1900	800	1040
	YL-II-25	18-25	1000×2200	1000	1440
	YL-II-35	25-35	1200×2400	1500	2000
	YL-II-50	35-50	1500×2500	2000	3200