FRP Housing Domestic Hard Water Treatment Equipment

• Customization: Available
• Installation: Cabinet Type
• Working Principle: Ion Exchange
• Model NO.: YLD
• Certification: CE, SGS
• Inlet Mode: Pipeline
• Heating Mode: No Require
• Material: FRP
• Flow Rate: 1 M3/H
• Working Pressure: 0.25 -0.5MPa
• Work Temperature: 0-50centigrade
• Raw Water Hardness: Less Than 8mmol/L
• Outflow Hardness: Less Than 0.03mmol/L
• Power Supply: 220V-380V
• Transport Package: Plywood Case Into Container
• Specification: CE, SGS
• Trademark: YLD
• Origin: Jiangyin, Jiangsu, China
• HS Code: 842121999
• Production Capacity: 5000 Sets/Year

Product Description

FRP Housing Domestic Hard Water Treatment


Working principle
To absorb the calcium and magnesium ions in the water with resin. As the hardness of the water is mainly formed and expressed by calcium and magnesium, the cation exchange resin (water softener)is generally used to replaceCa2 + and Mg2in the water The resin efficiency to removeca2 + and Mg2+ gradually reduces as ca2 + and Mg2 + in the resin increase. When the resin absorbs a certain amount of calcium and magnesium ions, it is necessary to be regenerated. In the regeneration process, the resin bed is flushed by saline in the salt box and hardness ions on the resin are replaced and discharged with recycled waste fluid, the resin's function of softening exchange is recovered. The principle of sodium ion exchanging softening treatment is to use sodium cation exchange resin to exchange the hardness ingredients, Ca2 + and Mg2 +, in the raw water with Na + in the resin, absorbing Ca2 + and Mg2 + in the water, so that water gets softened.
 
Equipment selection

Category	Model	Recommended water yield (M³/h)	Tank size Diameter *Height(mm)	Salt box (L)	Amount of resin(KG)
Single-valve and single-tank	YL-I-0.5	0.5	200×900	25	20
	YL-I-1	1	250×1400	60	40
	YL-I-2	2	300×1400	200	60
	YL-I-3	3	350×1400	100	80
	YL-I-4	4	400×1650	200	120
	YL-I-5	5	500×1750	300	180
	YL-I-6	6	300×1900	350	240
	YL-I-10	8-10	750×1900	500	360
	YL-I-18	42-18	900×1900	800	520
	YL-I-25	18-25	1000×2200	1000	720
	YL-I-35	25-30	1200×2400	1500	1000
	YL-I-50	35-50	1500×2500	2000	6400
Dual-valve and dual-tank (simultaneous operation and respective regeneration)	YL-II-36	24-36	900×1900	800	1040
	YL-II-50	36-50	1000×2200	1000	1440
	YL-II-70	50-70	1200×2400	1500	2000
	YL-II-100	70-100	1500×2500	2000	3200
Dual-valve and dual-tank(One for use and the other for standby)	YL-II-1	1	250×1400	60	80
	YL-II-2	2	300×1400	100	120
	YL-II-3	3	350×1400	100	160
	YL-II-4	4	400×1650	200	240
	YL-II-5	5	500×1750	300	360
	YL-II-6	6	600×1900	350	480
	YL-II-10	8-10	750×1900	500	720
	YL-II-18	12-18	900×1900	800	1040
	YL-II-25	18-25	1000×2200	1000	1440
	YL-II-35	25-35	1200×2400	1500	2000
	YL-II-50	35-50	1500×2500	2000	3200
Dual-valve and dual-tank(JK)	JK25-150	0.2-0.3	200×900×2pcs	25	40
	JK25-200	0.5-0.6	200×1200×2pcs	60	80
	JK25-250	0.8-1.0	250×1400×2pcs	60	120
	JK25-300	1.8-2.0	300×1400×2pcs	100	200
	JK25-350	2.8-3.0	350×1650×2pcs	100	240
	JK25-400	3.5-4.0	400×1650×2pcs	200	40