Disc Water Filter for Wastewater Water Treatment
Product introduction
1. Precise filtration: Discs with different precisions according to the different requirements of water usage: The specifications are as following: 2Op
M, 50pm. 100pm, 130pm and 200pm.
2. Backwashing with high efficiency: Complete backwashing with high speed will be finished within about 20 seconds.
3. Automatic running, successive water supply: In the filter stack, the backwashing process works in turn. The states could be switched freely. The
Successive water supply is assured and the pressure loss of the system is low.
4. Standard: Standard modular system design, the user could make his choice according to the need. It is very flexible and interchangeable.
5. Non-standard: Flexible use of the leftover space, the installation is according to the local conditions and occupies few spaces.
6. Reliable running and simple rnaintenance: Seldom daily maintenance, the parts are 100% inspected in the factory and with trial running. No
Special tool and seldom spare parts are required.
7. Long service lifespan: High tech plastic filter element is strong, no abrasion, . No corrosion, after many years'testing and application. The effect of filtration and backwashing will not reduce as time goes on.
Technical parameter
Work pressure: 0.25 -0.8Mpa
Backwashing pressure: 0.15 -0.6Mpa
Backwashing time: 5-20 seconds, adjustable
Water consumption of the backwashing: 30-100L (single filter head)
System pressure loss: 0.00 1- 0. O8Mpa
Work temperature: 4-75t
PH value: 4.0-13
Filter level reference
1. Pretreatment of the high quality water supply
2. Pretreatment of the domestic drinking water, the process is protected with the small tubule nozzle.
3. Filter of the circulating water ultrafiltration device protection
4. Filter of the circulating water, water supplying treatment, pre- Filtering
5. Reclaimed water treatment, waste water treatment
Item No.: |
|
Type: |
Disc |
Mesh: |
120 |
working pressure: |
6-10bar |
Max flux: |
50M3/H |
Filtration Area: |
1840cm2 |