Ylc-200 Immersion Ultraviolet Sterilizer Water Purifier Without Secondary Pollution

• Bactericidal Efficienc: 98% Kill Total Coliforms
• Material: Stainless Steel Ss304, Ss316
• Medium Material: PP (Propene Polymer)
• Lifespan of UV Lamp: 9000-12000 Hours
• Interface Type: Flange or Thread
• Flow Rate: 0.3--1000 Ton/Hour
• Model NO.: YLC-200
• Alert System for Lamp: One Set
• System Working Pressure Resistance: (0.6 Mpa)6kg/Cm2
• Raw Water Supplying: Running Water
• Brand of Ballast: Beasun
• Transport Package: Plywood Case Into Container
• Specification: CE, SGS
• Trademark: YLD
• Origin: Jiangyin, Jiangsu
• HS Code: 842121999
• Production Capacity: 5000 Sets/Year

Product Description

YLC-200 Ultraviolet Sterilizer Water Purifier Without Secondary Pollution

Ultraviolet Sterilizer Specifications

Detailed Product Description
Ultraviolet Sterilizers Efficiency
1. High bacterial efficiency
2. Low cost.

Ultraviolet Sterilizer Principle of Operation
UV water disinfection system design has been carefully conceived to provide adequate germicidal dosage throughout the disinfection chamber. The dosage, as it applies to UV disinfection, is a function of time and the intensity of UV radiation to which the water is exposed. Exposure time is related to the flow rate, the higher the flow rate, the lower the exposure time or the lower the flow rate, the higher the exposure time. The UV intensity is the amount of energy, per unit time, emitted by germicidal lamp. The Dosage is the product of UV intensity and the exposure time.

Limitation of Use
The UV water disinfection system NOT intended for the treatment of water that has an obvious contamination or intentional source, such as raw sewage, nor is the unit intended to convert wastewater to microbiologically safe drinking water.

Water Quality (in)
Water quality plays a major role in the transmission of germicidal UV rays. It is recommended that the water does not exceed following maximum concentration levels

Maximum Concentration Levels (Very Important)
Iron≤ 0.3ppm(0.3mg/L)
Hardness≤ 7gpg(120mg/L)
Turbidity≤ 1NTU
Manganese≤ 0.05ppm(0.05mg/L)
Tannins≤ 0.1ppm(0.3mg/L)
UV Transmittance≥ 750‰

Effectively treating water with higher concentration levels than listed above can be accomplished, but may require added measures to improve water quality to treatable levels. If, for any reason, it is believed the UV transmission is not satisfactory, contact the factory.
UV wavelength (nm)

DOSAGE is the product of intensity & time
Dosage=intensity*time=micro watt/cm2*time=microwatt-seconds per square centimeter
(μ W-s/cm2)
Note: 1000μ W-s/cm2=1mj/cm2(milli-joule/cm2)

As a general guideline, the following are some typical UV transmission rates (UVT)
City water supplies850-980‰
De-ionized or Reverse Osmosis water950-980‰
Surface waters(lakes, rivers, etc)700-900‰
Ground water(wells)900-950‰
Other liquids10-990‰
Lamps:

Products:


Packaging & Shipping
  

FAQ:

1.Are you a factory or trading company?
Yes, we are a manufacture with designing, manufacturing, marketing and exporting.

 

2.What products does your company offer by yourself?

We are specialized in making stainless steel and carbon stell filter, such as sand filter housing, cartridge filter, bag filter, stainless steel membrane housing, water softener housing, UV sterilizer, basket filter, water storage tank etc.

 

3.How do you usually pack the exported goods?

We usually use bubble bag, carton box, or wooden case. 

 

4.Which machine should I choose?

It depends on your raw water quality and your requirements for permeate water. 

 

5.What's your warranty?

Our warranty is 1 year. But normally, our machine can work 5 years before repair.

Send your enquiry to me: