Carbon Steel With Rubber Lining Activated Carbon Water Filter Vessel
Overview
Active carbon filter which is tank filter equipment, the shell is generally made of stainless steel, glass steel or carbon steel outer casing and internal filled with activated charcoal which is used filtering the free content in the water, microorganism, part of the heavy metal ions, and can effectively reduce the shade of the water.
Active carbon filter designing parameter should according to inlet water quality, processing requirements and the types of activated carbon, referring to the power station operate experience or through the test confirmation and should comply with the following principles:
1 Should choose active carbon which is well mechanical intensity, high speed adsorption, high capacity adsorption.
2 Active carbon filterfiltration rate can refer to the following table.
Filtration Rate Function |
Line Speed(m/h) |
Space Velocity (Nm3/m3) |
Remove Organics |
~10 |
5~10 |
Free Chlorine Residual |
Less than or equal to 20 |
Less than or equal to 10 |
After put the active carbon filter into Hydrogen ion exchanger, filtration rate can be appropriately increased.
3 Active carbon filter should backwashing regularly
Filter:
When the system is in a filtered State, the water flow through the water distributor which was unallowed,comply with shell,the water flow through the filter layer at the horizontal - flow state,as the water flowthe filter material layer, impurities are trapped within the filter layer,The filtered water is collected and evenly through water outflow,flowing parallel,at the high speed ,the filter could work well,and it can reach better effect too.
Backwash
With the continued accumulation of impurities in filter material layers, increasing loss of head,as the loss of head reaches a certain set limit, system will automatically be converted to the anti - washing, cleaning accumulation of impurities,
Backwashing happens at the differential pressure reaches 0. 05-0. 07Mpa,each time.and while the backwashing is over the differential pressure will back to 0.02-0.03Mpa.
| TPYE |
TANK SIZE
(mm) |
TOTAL HIGH
(mm) |
FLOW RATE
(m3/hr) |
INLET AND OUTLET
(mm) |
| YLD-MF-500 |
500*1500 |
2350 |
2 |
DN32 |
| YLD-MF- 600 |
600*1500 |
2380 |
2-3 |
DN32 |
| YLD-MF- 700 |
700*1500 |
2400 |
4 |
DN40 |
| YLD-MF- 800 |
800*1500 |
2400 |
5 |
DN40 |
| YLD-MF- 900 |
900*1500 |
2500 |
6 |
DN50 |
| YLD-MF- 1000 |
1000*1500 |
2600 |
8 |
DN50 |
| YLD-MF- 1200 |
1200*1500 |
2700 |
11 |
DN65 |
| YLD-MF- 1400 |
1400*1500 |
2800 |
15 |
DN65 |
| YLD-MF- 1500 |
1500*1500 |
2850 |
18 |
DN65 |
| YLD-MF- 1600 |
1600*1500 |
2900 |
20 |
DN80 |
| YLD-MF- 1800 |
1800*1500
1800*1800 |
3000 |
25 |
DN80 |
| YLD-MF- 2000 |
2000*1500 |
3100 |
30 |
DN100 |
| YLD-MF- 2200 |
2200*1500 |
3180 |
38 |
DN100 |
| YLD-MF- 2400 |
2400*1500 |
3330 |
45 |
DN100 |
| YLD-MF- 2500 |
2500*1500 |
3380 |
50 |
DN100 |
| YLD-MF- 2600 |
2600*1500 |
3430 |
55 |
DN125 |
| YLD-MF- 2800 |
2800*1500 |
3530 |
60 |
DN125 |
| YLD-MF- 3000 |
3000*1500 |
3630 |
70-80 |
DN125 |
| YLD-MF- 3200 |
3200*1500 |
3730 |
80~100 |
DN150 |
FAQ:
01. What is your raw water?
02. What is the flow rate per hour?
03. What is the power supply in your country?
04. What is the working pressure?
05. Do you need automatic or manual control system for this carbon filter?
){kind=link}