| Customization: | Available |
|---|---|
| Type: | Magnetic |
| Usage: | Environmental Protection, Chemical Industry, Water Treatment |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
It is based on a process which treats water without altering its mineral composition. Water flows through a magnetic coil from highly efficient permanent magnets. In this cell the water crosses a magnetic field perpendicular to the lines of induction. This contact polarizes the molecules contained in the water, thereby disrupting the normal crystallization process of mineral salts such as calcium and magnesium. Once these salts have been physically modified in this way, they lose their ability to attach themselves to the lining of pipes and tanks.
Operating Principle
Molecules (CaCo3, Potassium, Manganese, etc.) which are in natural suspension in water, tend to form macro molecules which, if nothing is done, continue to coagulate, causing scale to collect in the pipes with resultant reduction in flow and increased consumption of energy.
Technical Principles
Permanent magnets are installed along the entire length of the appliance, the lines of magnetic flux being captured by a mild iron cylinder (care being taken that the flow-rate is not affected.)
What Is The Result?
When passing through the magnetic field, the macro-molecules are polarized in such a way that their conglomerate structure is deliberately disorganized so that their original molecular state of natural suspension in the water is re-established. After passing through this induced field, they will retain a residual magnetic charge for more than 30 hours (which is substantially longer than the water renewal cycle, which does not exceed 12 hours); they cannot therefore recoagulate. In the case of ferruginous water, ferrous and ferric welding residues, an anti-corrosion process is established (thus eliminating electrolysis phenomena.)
model |
inlet and outlet | dimension(mm) | flow rate | Vertical center | Working medium | weight | |
| mm | inch | diameter*length | m 3 /h | strong magnetism (mt) | temperature ( . C) |
Kg | |
| YLC-1 | 25 | 1 | 108×330 | 4.9 | 160 | 0-80 | 3 |
| YLC-1.5 | 40 | 1.5 | 108×330 | 12 | 160 | 0-80 | 3.5 |
| YLC-2 | 50 | 2 | 159×450 | 19 | 160 | 0-80 | 5 |
| YLC-2.5 | 65 | 2.5 | 159×450 | 28 | 160 | 0-80 | 11 |
| YLC-3 | 80 | 3 | 159×450 | 50 | 160 | 0-80 | 15 |
| YLC-4 | 100 | 4 | 219×560 | 80 | 160 | 0-80 | 18 |
| YLC-5 | 125 | 5 | 219×600 | 125 | 160 | 0-80 | 21 |
| YLC-6 | 150 | 6 | 273×740 | 180 | 160 | 0-80 | 30 |
| YLC-8 | 200 | 8 | 325×790 | 320 | 160 | 0-80 | 40 |
| YLC-10 | 250 | 10 | 377×850 | 480 | 160 | 0-80 | 50 |
| YLC-12 | 300 | 12 | 426×800 | 600 | 160 | 0-80 | 58 |
| YLC-14 | 350 | 14 | 478×950 | 750 | 160 | 0-80 | 70 |
| YLC-16 | 400 | 16 | 530×1000 | 850 | 160 | 0-80 | 95 |
| YLC-18 | 450 | 18 | 630×1050 | 950 | 160 | 0-80 | 116 |
| YLC-20 | 500 | 20 | 720×1100 | 1100 | 160 | 0-80 | 148 |
01.What is the capacity(m3/hour)you required for this equipment?
or you could confirm diameter of the water pipe.
02.What is the material for this descaling equipment?
Ordinary carbon steel is Okay? stainless steel(SS304/SS316)?
Which means,what is the source of raw water to be treated?
03.What is the magnet power for it?
ordinary 5000 gauss?higher 10000 gauss?
Widely used in metallurgy, electric power, petroleum, chemical, shipbuilding, coal, rubber, textile, leather, paper making, pharmacy, food, beverage, agriculture, aquaculture and so on all walks of life, and hotel, hospital, hotel, building of central air conditioning, boiler...
1.Industrial circulating cooling water system, DC straight row of cooling water system, industrial process water system.
2.Boiler system (smoke pipe, water pipes, hot water), fue system.
3.Heat exchanger.
4.Central air conditioning, cold water machine, cooling water, cooling towers, pipes.
5.Air compressor cooler, plastic injection molding machine, dehumidifier, generators, industrial washing machine.
6.Oil pipe, water pipe, water plant...
){kind=link}