0.5t/H Manual Convenient Portable Home Use Water Softener (YL-0.5)

• Installation: Vertical Type
• Working Principle: Ion Exchange
• Certification: CE, SGS
• Inlet Mode: Pipeline
• Heating Mode: No
• Control Mode: Flow Rate Type, Time Type
• Model NO.: YL-0.5
• Resin: 001×7 Strong Acidic Cation-Exchange
• Working Ambient Temperature: 5-50centigrade
• Relative Humidity: Less Than 95%(25centigrade)
• Hardness of Raw Water: Less Than 8mmol/L
• Hardness of Effluent: Less Than 0.03mmol/L
• Inlet Water Pressure: 0.2 to 0.4mpa
• Free Chlorine: Less Than 0.3mg/L
• Suspended Solid: Less Than 0.5mg/L
• Iron Content: Less Than 0.3mg/L
• Transport Package: Plywood Case Into Container
• Specification: CE, SGS
• Trademark: YLD
• Origin: Jiangyin, Jiangsu
• HS Code: 842121999
• Production Capacity: 5000 Sets/Year

Product Description

Working principle
01. By means of Absorbing the calcium and magnesium ions in water with resin, since the hardness of water is mainly composed of calcium and magnesium, in general, we adopt cation exchange resin (softener), replace Ca2+, Mg2+ (main ingredients for scale) in water, as the increase of Ca2+ and Mg2+ in resin, removing performance on Ca2+, Mg2+ of resin will gradually reduce.
02. When the resin has absorbed a certain amount of calcium and magnesium ions, it must be regenerated, the regeneration process is that flush resin layer with the salt water in salt box, replace hardness ion out of the resin again, and discharged from the tank with waste liquid of regeneration, then resin resumed the function of softening and exchanging.
03. The principle of sodium ion exchange and softening treatment is to exchange cation in the raw water with resin, hardness constituents Ca2+and Mg2+ in water exchange Na+ in resin, thus absorb the Ca2+and Mg2+ to make the water to be softened.
2RNa + Ca2+ = R2Ca + 2Na+
2RNa + Mg2+ = R2Mg + 2Na+
After the water treated by sodium ion exchanger, the Ca+ and Mg+ were superseded by Na +.

Hardness of raw water	Less than 8mmol/L	Power supply	220V/50HZ
Hardness of effluent	Less than 0.03mmol/L	Control mode	flow rate type, time type
Inlet water pressure	0.2to 0.4Mpa	Resin	001×7strong acidic cation-exchange
Free chlorine	Less than 0.3mg/L	Working ambient temperature	5-50Centigrade
Suspended solid	Less than 0.5mg/L	System water temperature	5-45Centigrade
Iron content	Less than 0.3mg/L	Relative humidity	Less than 95%(25Centigrade)