Self Cleaning Strainer With Stainless Steel Screen
Product introduction
The inside structure of the automatic self-cleaning brush filter is made up of the stainless steel strainer and stainless steel wire brush and transmission part. The washing and the drainage are automatically finished by the drive motor and electrical valve. The operation way is automatic running (manual running is also Ok), It is with the double function of the pressure difference and regularly automatic drainage. The automation part takes use of the most advanced and reliable PLC in the world.
Technical parameter:
Working pressure: ≤1.0MPa(If exceed the pressure, please make a note when place an order); Pressure loss: ≤0.015MPa; Working temperature≤90Centigrade; Filter Precision d=1.2mm
FAQ:
01. What is your flow rate require?
02. What is the working pressure?
03. What is the material do you want?
04. What is the power supply in your counrty?
| Model | Inlet and outlet parameter | Drain | H | D | L | Output power(w) | Motor
Kw/r/min |
| mm | in | mm |
|
|
|
|
|
| YL-2Y | 50 | 2 | 25 | 300 | 159 | 550 | 19 | 0.18/1400 |
| YL-2.5Y | 65 | 2.5 | 25 | 300 | 159 | 550 | 28 | 0.18/1400 |
| YL-3Y | 80 | 3 | 25 | 300 | 219 | 600 | 50 | 0.18/1400 |
| YL-4Y | 100 | 4 | 25 | 300 | 219 | 600 | 80 | 0.18/1400 |
| YL-5Y | 125 | 5 | 25 | 350 | 219 | 600 | 125 | 0.18/1400 |
| YL-6Y | 150 | 6 | 32 | 350 | 273 | 650 | 180 | 0.18/1400 |
| YL-8Y | 200 | 8 | 40 | 525 | 325 | 850 | 320 | 0.18/1400 |
| YL-10Y | 250 | 10 | 50 | 650 | 377 | 900 | 490 | 0.18/1400 |
| YL-12Y | 300 | 12 | 65 | 680 | 425 | 1000 | 710 | 0.18/1400 |
| YL-14Y | 350 | 14 | 65 | 740 | 478 | 1100 | 970 | 0.18/1400
|
Features:
1. Electric device of the automatic washing
2. Filtering precision is from 3500 um to 200 um
3. Simple washing way: By stainless steel brush
4. Anti- Corrosion: Phosphatization treatment, the outside steel is coated with resin; It also could be with the shell of anti- Corrosion of the seawater or the stainless steel body.
5. No cutoff for the backwashing, low water consumption: No more than 1% of the total quantity.
Working Principle:
The inside structure of the automatic self-cleaning brush filter is made up of the stainless steel strainer and stainless steel wire brush and transmission part. The washing and the drainage are automatically finished by the drive motor and electrical valve. The operation way is automatic running (manual running is also Ok), It is with the double function of the pressure difference and regularly automatic drainage. The automation part takes use of the most advanced and reliable PLC in the world.
When the water flow gets through the filter, the impurity in the water is held by the strainer With the increase of the impurity accumulated on the surface of the strainer, the pressure difference reaches 0.04Mpa. The switch of the pressure difference will give out a signal while the PLC sends an instruction to start the drive motor and open the drainage valve; The impurity accumulated on the strainer will be brushed off with the rotating brush and discharged from the drainage exit. The whole process of brushing and draining require no personal operation and without machine halt. At the same time, the equipment is with the function of regular washing and draining and manual washing and draining to make sure that the water output is safe and reliable in any case.
Application
The circulated or non-circulated cooling water system, heat exchange system, central air conditioning system and central heating system in the industries like architecture, chemistry, metallurgy, rubber, paper making, light textile, coal and foods, used to protect the cooling equipment, heat exchange device and air conditioner accordingly.
){kind=link}