5000L/Hour RO Water Purifying System Removed 98% Salt, TDS, Tss and Bacterial

Product Details
Customization: Available
Certification: ISO9001
Salt Rejection Rate: 98.0%
Still deciding? Get samples of US$ 20000/Piece
Request Sample
Manufacturer/Factory & Trading Company

360° Virtual Tour

Diamond Member Since 2013

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Years of Export Experience
The export experience of the supplier is more than 10 years
In-stock Capacity
The supplier has In-stock capacity
QA/QC Inspectors
The supplier has 1 QA and QC inspection staff
Management Certification
The supplier has quality management system certification, including:
ISO9001:2015 certificate
to see all verified strength labels (24)
  • 5000L/Hour RO Water Purifying System Removed 98% Salt, TDS, Tss and Bacterial
  • 5000L/Hour RO Water Purifying System Removed 98% Salt, TDS, Tss and Bacterial
  • 5000L/Hour RO Water Purifying System Removed 98% Salt, TDS, Tss and Bacterial
  • 5000L/Hour RO Water Purifying System Removed 98% Salt, TDS, Tss and Bacterial
  • 5000L/Hour RO Water Purifying System Removed 98% Salt, TDS, Tss and Bacterial
  • 5000L/Hour RO Water Purifying System Removed 98% Salt, TDS, Tss and Bacterial
Find Similar Products

Basic Info.

Model NO.
YLD-RO-5000LPH
Application
Industry
Capacity
1100 Gallon
Material for Pre Filter
FRP,SS304/SS316
Membrane Vessel
FRP,SS304/SS316
Connection Pipe
FRP,SS304/SS316
Brand of Membrane
China Brands, Dow, Hydranautics,etc
Operation Pressure
0.5-1.6MPa
Control Mode
Timer Controller,PLC
Support Frame/Skid
Carbon Steel,SS304/SS316
Pressure Protection Switch
1 to 2 Pieces
Selection for Prefilter
Sand/Carbon/Resin Filter,PP Filter
Removal of Salt TDS
97%-98%
Feed Water Conductivity
350us/Cm2
Transport Package
Plywood Case
Specification
25.8CBM, 2953Kg
Trademark
YLD
Origin
Jiangyin, Jiangsu Province, China
HS Code
8421219990
Production Capacity
6 Sets/ Months

Product Description

REVERSE OSMOSIS WATER TREATMENT
Industry Leader in RO Expertise and Membrane Applications Since year of 1983.
For nearly four decades, Applied Membranes has been on the forefront of reverse osmosis technology, utilizing all improvements in the evolving techology and incorporating these into our product lines to offer the highest levels of performance and reliability available today.   AMI designs and manufactures membrane elements for a wide variety of applications and water challenges. Our understanding of the membrane technology is reflected in our reverse osmosis systems, resulting in water treatment solutions that give the highest levels of performance available in the market today.


What is Reverse Osmosis?
Reverse Osmosis (RO) is a membrane separation water purification process in which feed water flows along the membrane surface under pressure. Purified water permeates the membrane and is collected, while the concentrated water, containing dissolved and undissolved material that does not flow through the membrane, is discharged to the drain.
The key requirements of Reverse Osmosis (RO) process are a membrane and water under pressure. Other requirements include prefiltration to remove suspended impurities and carbon to remove chlorine (damages the membrane).
Most membranes remove 90-99+ % of the dissolved impurities depending on the impurity and the composition of water.
Reverse Osmosis, combined with pre-filtration, is able to remove 90 to 99.99% of the dissolved impurities that reside in your water.
Reverse osmosis systems (RO Systems) remove salts, microorganisms and many high molecular weight organics. System capacity depends on the water temperature, total dissolved solids in feed water, operating pressure and the overall recovery of the system.


5000L/Hour RO Water Purifying System Removed 98% Salt, TDS, Tss and Bacterial
How does a reverse osmosis system work?
A reverse osmosis system removes sediment and chlorine from water with a prefilter before it forces water through a semipermeable membrane to remove dissolved solids. After water exits the RO membrane, it passes through a postfilter to polish the drinking water before it enters a dedicated faucet. Reverse osmosis systems have various stages depending on their number of prefilters and postfilters. 
Stages of RO systems
The RO membrane is the focal point of a reverse osmosis system, but an RO system also includes other types of filtration. RO systems are made up of 3, 4, or 5 stages of filtration. 
Every reverse osmosis water system contains a sediment filter and a carbon filter in addition to the RO membrane.The filters are called either prefilters or postfilters depending on whether water passes through them before or after it passes through the membrane.
Each type of system contains one or more of the following filters:
Sediment filter: Reduces particles like dirt, dust, and rust
Carbon filter: Reduces volatile organic compounds (VOCs), chlorine, and other contaminants that give water a bad taste or odor
Semi-permeable membrane: Removes up to 98% of total dissolved solids (TDS)
5000L/Hour RO Water Purifying System Removed 98% Salt, TDS, Tss and Bacterial
When water first enters an RO system, it goes through prefiltration. Prefiltration typically includes a carbon filter and a sediment filter to remove sediment and chlorine that could clog or damage the RO membrane.
Next, water goes through the reverse osmosis membrane where dissolved particles, even too small to be seen with an electron microscope, are removed.
After filtration, water flows to the storage tank, where it is held until needed. A reverse osmosis system continues to filter water until the storage tank is full and then shuts off.

As there has water level alarm installed inside pure water tank,when the pure water level is below the min limit,the floating level switch will goes up,then the pump will start to operate RO system to produce pure water till water level above alarming line.

5000L/Hour RO Water Purifying System Removed 98% Salt, TDS, Tss and Bacterial
Why Choose Reverse Osmosis Water System?
A reverse osmosis system is one of the most advanced and efficient methods of water filtration. RO removes 98% of dissolved particles, making the drinking supply healthier and free of fluoride and unwanted minerals.
Why choose a reverse osmosis water filter system? Because it's the best option for cleaning water and removing harmful contaminants. A RO system reduces the sodium in the water and gets rid of bad tastes and odors. The benefits of reverse osmosis are evident in the environment and it makes life easy.
Deciding what type of RO system is best for you? We've got you covered, we've put this article together to help you understand what a reverse osmosis water filter does and how it can change the quality of drinking water.
5000L/Hour RO Water Purifying System Removed 98% Salt, TDS, Tss and Bacterial
How it works?
Reverse osmosis uses pressure to force contaminants from unfiltered water. A semipermeable membrane separates the particles from the water and provides clean drinking water. The semipermeable membrane has tiny pores that work to block particles and allow clean water molecules to flow out.
The reverse osmosis system removes chlorine and sediments from the water and then passes it through a post-filter to refine the drinking water before it comes out through the faucet.
Main Specifications for Reverse Osmosis(RO) water purifying system (note:booster pump lift=135 to 150m)
model Feed water pump Pre-treatment filter Booster pump  RO water Nos. of RO membranes
Capacity(m³/hour) Capacity(m³/hour) capacity capacity m³/hr* pieces
YLD-RO-250LPH 0.5-0.8m³/hour 0.5m³/hour 0.5m³/hour 0.25m³/hour 0.25m³/hr*1PC
YLD-RO-500LPH 1.0-1.2m³/hour 1m³/hour 1.0m³/hour 0.5m³/hour 0.25m³/hr*2PCs
YLD-RO-750LPH 1.5-1.8m³/hour 1.5m³/hour 1.5m³/hour 0.75m³/hour 0.25m³/hr*3PCs
YLD-RO-1000LPH 2.5-3m³/hour 2m³/hour 2.0m³/hour 1.0m³/hour 0.25m³/hr*4PCs
YLD-RO-1500LPH 3.5-4m³/hour 3m³/hour 2.5m³/hour 1.5m³/hour 0.25m³/hr*6PCs
YLD-RO-2000LPH 4.5-5m³/hour 3-4m³/hour 3.0m³/hour 2.0m³/hour 0.25m³/hr*8PCs(1m³/hr*2PCs)
YLD-RO-2500LPH 5.5-6m³/hour 4-5m³/hour 3-4m³/hour 2.5m³/hour 0.25m³/hr*10PCs(1m³/hr*3PCs)
YLD-RO-3000LPH 6.5-8m³/hour 4-6m³/hour 4-5m³/hour 3.0m³/hour 0.25m³/hr*12PCs(1m³/hr*3PCs)
YLD-RO-4000LPH 8-10m³/hour 6-8m³/hour 5-6m³/hour 4.0m³/hour 1m³/hr*4PCs(or 5PCs)
YLD-RO-5000LPH 10-11m³/hour 8-10m³/hour 6-7m³/hour 5.0m³/hour 1m³/hr*5PCs(or 6PCs)
YLD-RO-6000LPH 12-15m³/hour 10-12m³/hour 7-9m³/hour 6.0m³/hour 1m³/hr*6PCs(or 8PCs)
YLD-RO-8000LPH 13-16m³/hour 13-16m³/hour 9-10m³/hour 8.0m³/hour 1m³/hr*8PCs((or 9PCs))
YLD-RO-10000LPH 20-22m³/hour  18-20m³/hour  11-22m³/hour 10m³/hour 1m³/hr*10PCs(or 12PCs)
YLD-RO-12000LPH 22-27m³/hour 22-24m³/hour 15-18m³/hour 12m³/hour 1m³/hr*12PCs(or 15PCs)
YLD-RO-15000LPH 30-35m³/hour  28-30m³/hour  18-20m³/hour 15m³/hour 1m³/hr*15PCs(or 18PCs)
YLD-RO-20000LPH 35-42m³/hour  35-40m³/hour 22-28m³/hour 20m³/hour 1m³/hr*20PCs(or 24PCs)
YLD-RO-25000LPH 45-52m³/hour 48-50m³/hour 28-35m³/hour 25m³/hour 1m³/hr*25PCs,(or 27PCs)
YLD-RO-30000LPH 53-65m³/hour 56-60m³/hour 33-40m³/hour 30m³/hour 1m³/hr*30PCs(or 33PCs)
 
5000L/Hour RO Water Purifying System Removed 98% Salt, TDS, Tss and Bacterial




 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier