Well Water Purifying System Bypass Filtration Automatic Rapid Sand Filter

• Customization: Available
• Type: Activated Carbon
• Usage: Environmental Protection
• Model NO.: YL-SSF-1200
• Motive Force: Pressure
• Style: Vertical
• Performance: Efficient Filtration
• Certification: CE, GS
• Material for Filter Tank: Carbon Steel,Ss304/316,FRP
• Face Pipe: Carbon Steel,Ss304/316,,UPVC
• Design Pressure: 0.6/1.0/1.6/2.0MPa
• Working Pressure: 0.5-1.6MPa
• Working Temperature: 5-80 Centigrade
• Control System: Timer,PLC,Pressure
• Sand Material: Silica Sand,Quartz Sand
• Transport Package: Plywood Case Into Container or Without Case
• Specification: to be practical
• Trademark: YLD
• Origin: Jiangyin, China
• HS Code: 842121999
• Production Capacity: 100 Units/Month

Product Description

A rapid sand filter is a water treatment device that uses sand or other grainy media to filterout the solid particles suspended in water. These suspended solids include dirt and other organic matter that cause water to appear cloudy or turbid. Rapid sand filtration is commonly used by municipal water treatment plants to clean surface and ground water intended for drinking water. It is also used to treat sewage and industrial wastewater containing biological contaminants before these waters are discharged to the environment.
Rapid sand filtration takes place in a tank containing one or more layers of grainy media, such as sand, anthracite or hard coal, garnet, magnetite, or other minerals. The total media depth typically ranges from 2-6 feet (about 0.6-1.8 meters). In many systems the incoming water, or influent, enters near the top of the tank and flows downward through the media. The outgoing water, or effluent, leaves through a drainage system called the underdrain that lies underneath the filter media bed.

Sand filters are typically used for:  

Irrigation water
Storm water
Cooling water
Swimming pool water
Water in fountains and other water features
 
Removing suspended solids smaller than 40 microns requires filters with either two or three layers of filter media. These are referred to as dual-media filters or multi-media filters. When sized properly and with the correct configuration of filter media, these filters can remove suspended solids as small as 5 micron.
Units are skid-mounted, factory assembled, wired, and tested, and delivered ready for installation. Piping, valves, filter media, pressure gauges and accessories are included with filter systems. Solar power, media air scour, and rinse cycle are available as options. Filter systems are engineered to require little maintenance. A separate source of water supply or a pump for backwash are seldom needed.
 
Dual and Multi-media filters are typically used for:
Industrial process water
Waste water
Potable (drinking) water.
The size of each filter, the number of filters required, and the type of filter media used depend upon:
how small a solid needs to be removed,
how dirty the water is,
how the water will be used once it is filtered,
and the source of backwash water needed to clean the filters
 Technical parameters sheet for Shallow Sand Filter (Bypass Filtration Sand Filter)

model	Filter diameter	Height	inlet-outlet	filtration area	capacity
	mm	mm	mm	m²	m³/hour
YL-SSF-500	500	816	40	0.2	6~10
YL-SSF-600	600	874	40	0.28	8~14
YL-SSF-700	700	900	40	0.38	12~19
YL-SSF-800	800	960	DN50	0.50	15-25
YL-SSF-1000	1000	1200	DN50	0.79	23-39
YL-SSF-1200	1200	1400	DN80	1.13	33-55
YL-SSF-1400	1400	1600	DN100	1.54	45-75
YL-SSF-1600	1600	1800	DN100	2.01	60-100
YL-SSF-1800	1800	1950	DN150	2.54	75-125
YL-SSF-2000	2000	2150	DN150	3.14	95-155
YL-SSF-2200	2200	2250	DN150	3.80	115-190
YL-SSF-2400	2400	2100	DN150	4.52	130-210
YL-SSF-2600	2600	2400	DN150	5.30	145-225
YL-SSF-2800	2800	2500	DN200	6.15	155-240
YL-SSF-3000	3000	2600	DN200	7.00	170-255
YL-SSF-3200	3200	2800	DN250	8.15	270-320
YL-SSF-3400	3400	3000	DN300	9.2	350-400